Home › Vehicles › 2015 Kia Sportage › Serpentine Belt

What Serpentine Belt Fits a 2015 Kia Sportage?

Serpentine belt part numbers catalogued for the 2015 Kia Sportage (1.6 L petrol, 4-cyl, 135 hp), the engine variants that change them, and how to replace it.

The 2015 Kia Sportage with the 1.6 L petrol, 4-cyl, 135 hp engine takes serpentine belts such as GATES 6PK1255, DAYCO 6PK1265S and SKF VKMV 6PK1257 (aftermarket parts catalogue). The catalogue lists 109 serpentine belts from 56 brands for this engine, OSSCA and WILMINK GROUP listing the most (6 each). The 2015 Sportage was built with 20 engine variants (from 1.6 L to 2.4 L); these part numbers are catalogued for the 1.6 L petrol, and other engines can take a different serpentine belt.

Last updated:  ·  Source: aftermarket parts catalogue

Find the exact serpentine belt for your 2015 Kia Sportage by VIN → Search parts by VIN →
VIN matched parts Engine component 18 verified vehicle specs

2015 Kia Sportage serpentine belt: key facts

Catalogued engine1.6 L petrol, 4-cyl, 135 hp
Part numbers6PK1255 (GATES); 6PK1265S (DAYCO); 6PK1255 (DAYCO); 6PK1264 (DAYCO); VKMV 6PK1257 (SKF); VKMV 6PK1255 (SKF)
Catalogue listings109 serpentine belts, 56 brands
Engine variants (2015)20, from 1.6 L to 2.4 L
Fit is decided byThe engine and its accessories (A/C, power steering), which set the rib count and the belt length
NHTSA recalls: engineNone of 2 on record
DIYModerate DIY (note the belt routing first)

Sources: aftermarket parts catalogue (part numbers, engines), NHTSA recalls.

Serpentine Belt: what it does & when to replace it

The serpentine belt is a single belt that drives accessories like the alternator, water pump, power-steering pump, and A/C compressor. A worn belt causes squealing (especially on cold starts), and a snapped belt can cause overheating and loss of charging and power steering at once. Inspect for cracks, glazing, or fraying; most belts last 80,000–160,000 km. Replacement is a moderate DIY job — the trickiest part is releasing the spring-loaded tensioner and routing the belt correctly, so photograph the routing diagram first.

DIY difficulty: Moderate DIY (note the belt routing first). Always confirm the correct part for your exact build by VIN before buying.

Which engine does your 2015 Kia Sportage have?

The 2015 Kia Sportage was sold with 20 engine variants, and the correct serpentine belt can differ between them. This is the single thing a year/make/model dropdown cannot tell you.

EngineFuelCylindersYears
1.6 L 135 hpPetrol42010–2015
1.7 L 116 hpDiesel42010–2015
2.0 L 184 hpDiesel42010–2015
2.4 L 177 hpPetrol42010–2015
2.0 L 163 hpPetrol42010–2015
2.0 L 136 hpDiesel42010–2015
2.0 L 178 hpPetrol/Ethanol42012–2016
2.0 L 260 hpPetrol42010–2016
2.4 L 178 hpPetrol42010–2015
2.0 L 166 hpPetrol42010–2015
2.0 L 177 hpDiesel42012–2016
2.0 L 264 hpPetrol42013–2015
2.4 L 185 hpPetrol42013–2016
2.0 L 151 hpPetrol42015–2015
2.0 L 158 hpPetrol42014–2015
2.0 L 154 hpPetrol42014–2015
2.0 L 150 hpPetrol42014–2015
1.6 L 135 hpPetrol/Liquified Petroleum Gas (LPG)42014–2015
1.6 L 140 hpPetrol42012–2015
2.0 L 156 hpPetrol42015–2015

Engine variants catalogued for this model (parts catalogue), filtered to those built around 2015. We hold catalogued part numbers for the base engine only — decode your VIN and we resolve your exact engine, then the exact part. Full dimensions and specifications for this vehicle are on the 2015 Kia Sportage overview.

How to replace the serpentine belt on a 2015 Kia Sportage

Difficulty: Moderate Time: about 30–60 minutes Tools: Serpentine belt / tensioner tool, Socket set
  1. 1Photograph or note the belt routing diagram (often on a decal under the hood) before you start.
  2. 2Fit the tensioner tool and rotate the spring-loaded tensioner to release belt tension.
  3. 3Slip the old belt off the pulleys and let the tensioner back gently.
  4. 4Route the new belt exactly per the diagram, keeping it centered on each pulley.
  5. 5Release the tensioner onto the new belt, double-check the routing and seating, then start the engine to confirm quiet running.

⚠ Correct routing is essential — a mis-routed belt can fail quickly.

These are general steps for the engine category. Exact fastener locations, torque values, and the correct part number depend on your 2015 Kia Sportage’s build — confirm by VIN before you start.

Compatible parts for your 2015 Kia Sportage

Real serpentine belt options catalogued for this 2015 Kia Sportage (parts catalogue), shown for the base engine (1.6000 L Petrol). Each links to live marketplace listings for that exact brand and part number.

BrandPart numberNoteShop
GATES 6PK1255⇆ cross-ref V-Ribbed Belt Find this part →
DAYCO 6PK1265S⇆ cross-ref V-Ribbed Belt Find this part →
DAYCO 6PK1255⇆ cross-ref V-Ribbed Belt Find this part →
DAYCO 6PK1264⇆ cross-ref V-Ribbed Belt Find this part →
SKF VKMV 6PK1257⇆ cross-ref V-Ribbed Belt Find this part →
SKF VKMV 6PK1255⇆ cross-ref V-Ribbed Belt Find this part →

Compatible options shown for the base engine — exact fit can vary by engine and trim; confirm with your VIN before buying. Part data: aftermarket parts catalogue.

Got a part number for your 2015 Kia Sportage? Cross-reference it against every brand — free. Cross-reference a part →

Shop serpentine belt for your 2015 Kia Sportage

Browse serpentine belt listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.

Affiliate disclosure: VinSnap may earn a commission from qualifying purchases made through these links, at no extra cost to you.

Find the exact serpentine belt by VIN

Find parts for your exact 2015 Kia Sportage by VIN. Stop buying the wrong part.

Find parts by VIN →

Decode your exact VIN

Get 100+ specs for your specific 2015 Kia Sportage — engine, trim, recalls, and a PDF. Instant decode for $1.99.

Decode my VIN →

Frequently asked questions

What serpentine belt fits a 2015 Kia Sportage?

The 2015 Kia Sportage with the 1.6 L petrol, 4-cyl, 135 hp engine takes serpentine belts such as GATES 6PK1255, DAYCO 6PK1265S and SKF VKMV 6PK1257 (aftermarket parts catalogue). The 2015 Sportage was built with 20 engine variants (from 1.6 L to 2.4 L); these part numbers are catalogued for the 1.6 L petrol, and other engines can take a different serpentine belt.

Which brands make serpentine belts for the 2015 Kia Sportage?

For the 1.6 L petrol engine, the catalogue lists 109 serpentine belts from 56 brands: OSSCA, WILMINK GROUP, MILES, MITSUBOSHI, DAYCO, HUTCHINSON, Mchanix, RED-LINE and 48 more.

How often should the serpentine belt on a 2015 Kia Sportage be replaced?

The serpentine belt is a single belt that drives accessories like the alternator, water pump, power-steering pump, and A/C compressor. A worn belt causes squealing (especially on cold starts), and a snapped belt can cause overheating and loss of charging and power steering at once. VinSnap has no manufacturer-specific interval on file for the 2015 Kia Sportage; the owner’s manual has the official schedule.

Can I replace the serpentine belt on a 2015 Kia Sportage myself?

Moderate DIY (note the belt routing first). Allow about 30–60 minutes. Tools: serpentine belt / tensioner tool, socket set. Correct routing is essential — a mis-routed belt can fail quickly.

More parts for the 2015 Kia Sportage

Helpful guides

Share this page