What Serpentine Belt Fits a 2015 Nissan Sentra?
Serpentine belt part numbers catalogued for the 2015 Nissan Sentra (1.6 L petrol, 4-cyl, 113 hp), the engine variants that change them, and how to replace it.
The 2015 Nissan Sentra with the 1.6 L petrol, 4-cyl, 113 hp engine takes serpentine belts such as GATES 7PK1125, BLUE PRINT AD07R1127 and BOSCH 1 987 948 317 (aftermarket parts catalogue). The catalogue lists 12 serpentine belts from 11 brands for this engine, SNR listing the most (2). The 2015 Sentra was built with 8 engine variants (from 1.6 L to 2.0 L); these part numbers are catalogued for the 1.6 L petrol, and other engines can take a different serpentine belt.
Last updated: · Source: aftermarket parts catalogue
2015 Nissan Sentra serpentine belt: key facts
| Catalogued engine | 1.6 L petrol, 4-cyl, 113 hp |
|---|---|
| Part numbers | 7PK1125 (GATES); AD07R1127 (BLUE PRINT); 1 987 948 317 (BOSCH); 7PK1125 (LYNXAUTO); N111N75 (NPS); CA7PK1127 (SNR) |
| Catalogue listings | 12 serpentine belts, 11 brands |
| Engine variants (2015) | 8, from 1.6 L to 2.0 L |
| Fit is decided by | The engine and its accessories (A/C, power steering), which set the rib count and the belt length |
| NHTSA recalls: engine | None of 3 on record |
| DIY | Moderate DIY (note the belt routing first) |
Sources: aftermarket parts catalogue (part numbers, engines), NHTSA recalls.
Serpentine Belt: what it does & when to replace it
The serpentine belt is a single belt that drives accessories like the alternator, water pump, power-steering pump, and A/C compressor. A worn belt causes squealing (especially on cold starts), and a snapped belt can cause overheating and loss of charging and power steering at once. Inspect for cracks, glazing, or fraying; most belts last 80,000–160,000 km. Replacement is a moderate DIY job — the trickiest part is releasing the spring-loaded tensioner and routing the belt correctly, so photograph the routing diagram first.
DIY difficulty: Moderate DIY (note the belt routing first). Always confirm the correct part for your exact build by VIN before buying.
Which engine does your 2015 Nissan Sentra have?
The 2015 Nissan Sentra was sold with 8 engine variants, and the correct serpentine belt can differ between them. This is the single thing a year/make/model dropdown cannot tell you.
| Engine | Fuel | Cylinders | Years |
|---|---|---|---|
| 1.8 L 131 hp | Petrol | 4 | 2012–now |
| 2.0 L 140 hp | Petrol/Ethanol | 4 | 2013–2020 |
| 1.6 L 117 hp | Petrol | 4 | 2014–now |
| 1.6 L 116 hp | Petrol | 4 | 2013–now |
| 2.0 L 140 hp | Petrol | 4 | 2014–now |
| 1.6 L 190 hp | Petrol | 4 | 2014–now |
| 1.8 L 129 hp | Petrol | 4 | 2015–now |
| 1.6 L 113 hp | Petrol | 4 | 2013–now |
Engine variants catalogued for this model (parts catalogue), filtered to those built around 2015. We hold catalogued part numbers for the base engine only — decode your VIN and we resolve your exact engine, then the exact part. Full dimensions and specifications for this vehicle are on the 2015 Nissan Sentra overview.
How to replace the serpentine belt on a 2015 Nissan Sentra
- 1Photograph or note the belt routing diagram (often on a decal under the hood) before you start.
- 2Fit the tensioner tool and rotate the spring-loaded tensioner to release belt tension.
- 3Slip the old belt off the pulleys and let the tensioner back gently.
- 4Route the new belt exactly per the diagram, keeping it centered on each pulley.
- 5Release the tensioner onto the new belt, double-check the routing and seating, then start the engine to confirm quiet running.
⚠ Correct routing is essential — a mis-routed belt can fail quickly.
These are general steps for the engine category. Exact fastener locations, torque values, and the correct part number depend on your 2015 Nissan Sentra’s build — confirm by VIN before you start.
Compatible parts for your 2015 Nissan Sentra
Real serpentine belt options catalogued for this 2015 Nissan Sentra (parts catalogue), shown for the base engine (1.6000 L Petrol). Each links to live marketplace listings for that exact brand and part number.
| Brand | Part number | Note | Shop |
|---|---|---|---|
| GATES | 7PK1125⇆ cross-ref |
V-Ribbed Belt | Find this part → |
| BLUE PRINT | AD07R1127⇆ cross-ref |
V-Ribbed Belt | Find this part → |
| BOSCH | 1 987 948 317⇆ cross-ref |
V-Ribbed Belt | Find this part → |
| LYNXAUTO | 7PK1125⇆ cross-ref |
V-Ribbed Belt | Find this part → |
| NPS | N111N75⇆ cross-ref |
V-Ribbed Belt | Find this part → |
| SNR | CA7PK1127⇆ cross-ref |
V-Ribbed Belt | Find this part → |
Compatible options shown for the base engine — exact fit can vary by engine and trim; confirm with your VIN before buying. Part data: aftermarket parts catalogue.
Shop serpentine belt for your 2015 Nissan Sentra
Browse serpentine belt listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact serpentine belt by VIN
Find parts for your exact 2015 Nissan Sentra by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2015 Nissan Sentra — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What serpentine belt fits a 2015 Nissan Sentra?
The 2015 Nissan Sentra with the 1.6 L petrol, 4-cyl, 113 hp engine takes serpentine belts such as GATES 7PK1125, BLUE PRINT AD07R1127 and BOSCH 1 987 948 317 (aftermarket parts catalogue). The 2015 Sentra was built with 8 engine variants (from 1.6 L to 2.0 L); these part numbers are catalogued for the 1.6 L petrol, and other engines can take a different serpentine belt.
Which brands make serpentine belts for the 2015 Nissan Sentra?
For the 1.6 L petrol engine, the catalogue lists 12 serpentine belts from 11 brands: SNR, BLUE PRINT, BOSCH, GATES, KAVO PARTS, LYNXAUTO, NPS, OSSCA and 3 more.
How often should the serpentine belt on a 2015 Nissan Sentra be replaced?
The serpentine belt is a single belt that drives accessories like the alternator, water pump, power-steering pump, and A/C compressor. A worn belt causes squealing (especially on cold starts), and a snapped belt can cause overheating and loss of charging and power steering at once. VinSnap has no manufacturer-specific interval on file for the 2015 Nissan Sentra; the owner’s manual has the official schedule.
Can I replace the serpentine belt on a 2015 Nissan Sentra myself?
Moderate DIY (note the belt routing first). Allow about 30–60 minutes. Tools: serpentine belt / tensioner tool, socket set. Correct routing is essential — a mis-routed belt can fail quickly.