What Serpentine Belt Fits a 2015 Ram 1500?
What decides serpentine belt fit on the 2015 Ram 1500, where to find your VIN, and how to replace it.
VinSnap does not have a verified serpentine belt part number for the 2015 Ram 1500 yet. Which serpentine belt fits depends on the engine and its accessories (A/C, power steering), which set the rib count and the belt length, so compare those on the part you are replacing. The 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb; it identifies the exact engine and trim.
Last updated: · Source: VinSnap
2015 Ram 1500 serpentine belt: key facts
| Verified part number | None on file yet |
|---|---|
| Fit is decided by | The engine and its accessories (A/C, power steering), which set the rib count and the belt length |
| NHTSA recalls: engine | 3 of 18 for this model |
| DIY | Moderate DIY (note the belt routing first) |
Sources: NHTSA recalls.
Serpentine Belt: what it does & when to replace it
The serpentine belt is a single belt that drives accessories like the alternator, water pump, power-steering pump, and A/C compressor. A worn belt causes squealing (especially on cold starts), and a snapped belt can cause overheating and loss of charging and power steering at once. Inspect for cracks, glazing, or fraying; most belts last 80,000–160,000 km. Replacement is a moderate DIY job — the trickiest part is releasing the spring-loaded tensioner and routing the belt correctly, so photograph the routing diagram first.
DIY difficulty: Moderate DIY (note the belt routing first). Always confirm the correct part for your exact build by VIN before buying.
2015 Ram 1500 specifications
| Specification | Value |
|---|---|
| Make | Ram |
| Model | 1500 |
| Model Year | 2015 |
| Overall Length (mm) | 5410 |
| Overall Width (mm) | 2050 |
| Overall Height (mm) | 2520 |
| Wheelbase (mm) | 3450 |
| Curb Weight (kg) | 2145 |
| Front Bumper to Windshield Base (mm) | 720 |
| Side Glass Height (mm) | 660 |
| Side Glass Base to Rocker Panel (mm) | 1010 |
| Roof Width Between Side Rails (mm) | 1900 |
| Front Overhang (mm) | 950 |
| Rear Overhang (mm) | 1010 |
| Front Track Width (mm) | 1810 |
| Rear Track Width (mm) | 1790 |
| Models Ram offered in 2015 | 80 |
Source: NHTSA vPIC / Canadian Vehicle Specifications database. Linear dimensions in mm; weight in kg. Your exact build may vary by trim and options — decode your VIN to confirm the correct serpentine belt.
How to replace the serpentine belt on a 2015 Ram 1500
- 1Photograph or note the belt routing diagram (often on a decal under the hood) before you start.
- 2Fit the tensioner tool and rotate the spring-loaded tensioner to release belt tension.
- 3Slip the old belt off the pulleys and let the tensioner back gently.
- 4Route the new belt exactly per the diagram, keeping it centered on each pulley.
- 5Release the tensioner onto the new belt, double-check the routing and seating, then start the engine to confirm quiet running.
⚠ Correct routing is essential — a mis-routed belt can fail quickly.
These are general steps for the engine category. Exact fastener locations, torque values, and the correct part number depend on your 2015 Ram 1500’s build — confirm by VIN before you start.
Shop serpentine belt for your 2015 Ram 1500
Browse serpentine belt listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact serpentine belt by VIN
Find parts for your exact 2015 Ram 1500 by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2015 Ram 1500 — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What serpentine belt fits a 2015 Ram 1500?
VinSnap has no verified serpentine belt part number for the 2015 Ram 1500 yet. Match on the engine and its accessories (A/C, power steering), which set the rib count and the belt length; the 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb, and it pins down the engine and trim.
How often should the serpentine belt on a 2015 Ram 1500 be replaced?
The serpentine belt is a single belt that drives accessories like the alternator, water pump, power-steering pump, and A/C compressor. A worn belt causes squealing (especially on cold starts), and a snapped belt can cause overheating and loss of charging and power steering at once. VinSnap has no manufacturer-specific interval on file for the 2015 Ram 1500; the owner’s manual has the official schedule.
Can I replace the serpentine belt on a 2015 Ram 1500 myself?
Moderate DIY (note the belt routing first). Allow about 30–60 minutes. Tools: serpentine belt / tensioner tool, socket set. Correct routing is essential — a mis-routed belt can fail quickly.
Are there recalls on the 2015 Ram 1500’s engine?
Yes. NHTSA lists 3 recalls for the 2015 Ram 1500 filed under the engine: 23V411000 (2023-06-08), engine and engine cooling; 20V475000 (2020-08-13), engine and engine cooling / engine / diesel; 19V757000 (2019-10-24), engine and engine cooling / exhaust system / emission control / gas recirculation valve (egr valve). Recall repairs are free at a franchised Ram dealer.