What Water Pump Fits a 2016 Buick Encore?
Water pump part numbers catalogued for the 2016 Buick Encore (1.4 L petrol, 4-cyl, 140 hp), the engine variants that change them, and how to replace it.
The 2016 Buick Encore with the 1.4 L petrol, 4-cyl, 140 hp engine takes water pumps such as GATES WP0232, GATES-MX 43080 and HERTH+BUSS JAKOPARTS J1510919 (aftermarket parts catalogue). The catalogue lists 18 water pumps from 15 brands for this engine. The 2016 Encore was built with 2 engine variants (all 1.4 L); these part numbers are catalogued for the 1.4 L petrol, and other engines can take a different water pump.
Last updated: · Source: aftermarket parts catalogue
2016 Buick Encore water pump: key facts
| Catalogued engine | 1.4 L petrol, 4-cyl, 140 hp |
|---|---|
| Part numbers | WP0232 (GATES); 43080 (GATES-MX); 42201 (GATES-MX); J1510919 (HERTH+BUSS JAKOPARTS); PA10191 (BUGATTI); 980787-TH2 (GK) |
| Catalogue listings | 18 water pumps, 15 brands |
| Engine variants (2016) | 2, all 1.4 L |
| Fit is decided by | The engine code and how the pump is driven (timing belt, timing chain or accessory belt) |
| NHTSA recalls: engine and engine cooling | None of 2 on record |
| DIY | Advanced DIY (often done with timing belt) |
Sources: aftermarket parts catalogue (part numbers, engines), NHTSA recalls.
Water Pump: what it does & when to replace it
The water pump circulates coolant through the engine and radiator to keep temperatures in check. Failure signs include coolant leaking from the pump weep hole, a whining or grinding bearing noise, overheating, or coolant pooling at the front of the engine. On many engines the pump is driven by the timing belt, so it is commonly replaced together with the timing belt to save labor. This is an advanced DIY or shop job — access is often deep in the engine and incorrect coolant bleeding can cause overheating.
DIY difficulty: Advanced DIY (often done with timing belt). Always confirm the correct part for your exact build by VIN before buying.
Which engine does your 2016 Buick Encore have?
The 2016 Buick Encore was sold with 2 engine variants, and the correct water pump can differ between them. This is the single thing a year/make/model dropdown cannot tell you.
| Engine | Fuel | Cylinders | Years |
|---|---|---|---|
| 1.4 L 140 hp | Petrol | 4 | 2012–now |
| 1.4 L 155 hp | Petrol | 4 | 2015–2019 |
Engine variants catalogued for this model (parts catalogue), filtered to those built around 2016. We hold catalogued part numbers for the base engine only — decode your VIN and we resolve your exact engine, then the exact part. Full dimensions and specifications for this vehicle are on the 2016 Buick Encore overview.
How to replace the water pump on a 2016 Buick Encore
- 1With the engine cold, drain the coolant and remove any covers, belts, or the timing belt as needed to reach the pump.
- 2Unbolt the old water pump and remove it, then clean the mating surface completely of old gasket material.
- 3Fit the new pump with a fresh gasket/seal, torquing the bolts evenly to spec.
- 4Reassemble the belt(s)/timing components, hoses, and covers.
- 5Refill and bleed the cooling system, then run the engine and verify no leaks and normal temperature.
⚠ Often driven by the timing belt — replace both together. Incorrect bleeding causes overheating.
These are general steps for the cooling category. Exact fastener locations, torque values, and the correct part number depend on your 2016 Buick Encore’s build — confirm by VIN before you start.
Compatible parts for your 2016 Buick Encore
Real water pump options catalogued for this 2016 Buick Encore (parts catalogue), shown for the base engine (1.4000 L Petrol). Each links to live marketplace listings for that exact brand and part number.
| Brand | Part number | Note | Shop |
|---|---|---|---|
| GATES | WP0232⇆ cross-ref |
Water Pump, engine cooling | Find this part → |
| GATES-MX | 43080⇆ cross-ref |
Water Pump, engine cooling | Find this part → |
| GATES-MX | 42201⇆ cross-ref |
Water Pump, engine cooling | Find this part → |
| HERTH+BUSS JAKOPARTS | J1510919⇆ cross-ref |
Water Pump, engine cooling | Find this part → |
| BUGATTI | PA10191⇆ cross-ref |
Water Pump, engine cooling | Find this part → |
| GK | 980787-TH2⇆ cross-ref |
Water Pump, engine cooling | Find this part → |
Compatible options shown for the base engine — exact fit can vary by engine and trim; confirm with your VIN before buying. Part data: aftermarket parts catalogue.
Shop water pump for your 2016 Buick Encore
Browse water pump listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact water pump by VIN
Find parts for your exact 2016 Buick Encore by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2016 Buick Encore — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What water pump fits a 2016 Buick Encore?
The 2016 Buick Encore with the 1.4 L petrol, 4-cyl, 140 hp engine takes water pumps such as GATES WP0232, GATES-MX 43080 and HERTH+BUSS JAKOPARTS J1510919 (aftermarket parts catalogue). The 2016 Encore was built with 2 engine variants (all 1.4 L); these part numbers are catalogued for the 1.4 L petrol, and other engines can take a different water pump.
Which brands make water pumps for the 2016 Buick Encore?
For the 1.4 L petrol engine, the catalogue lists 18 water pumps from 15 brands: GATES-MX, GK, HEPU, BUGATTI, EUROREPAR, GATES, GRAF, HERTH+BUSS JAKOPARTS and 7 more.
How often should the water pump on a 2016 Buick Encore be replaced?
The water pump circulates coolant through the engine and radiator to keep temperatures in check. Failure signs include coolant leaking from the pump weep hole, a whining or grinding bearing noise, overheating, or coolant pooling at the front of the engine. VinSnap has no manufacturer-specific interval on file for the 2016 Buick Encore; the owner’s manual has the official schedule.
Can I replace the water pump on a 2016 Buick Encore myself?
Advanced DIY (often done with timing belt). Allow about 3–5 hours. Tools: drain pan, socket set, torque wrench, gasket scraper, fresh coolant. Often driven by the timing belt — replace both together. Incorrect bleeding causes overheating.