What Serpentine Belt Fit a 2016 Chevrolet Traverse?
Serpentine Belt fitment for the 2016 Chevrolet Traverse — real NHTSA specs, replacement guidance, and how to find the exact guaranteed-fit part by VIN.
The correct serpentine belt for a 2016 Chevrolet Traverse is determined by its exact factory build, not just the year, make, and model. This 2016 Chevrolet Traverse is 5170 mm long with a 3020 mm wheelbase and weighs 2197 kg (NHTSA data), figures that influence which engine components were fitted from the factory. To get the exact guaranteed-fit serpentine belt, decode your 17-character VIN — it pins down the trim, engine, and options the year/make/model alone can't.
Last updated: · Source: NHTSA vPIC
Serpentine Belt: what it does & when to replace it
The serpentine belt is a single belt that drives accessories like the alternator, water pump, power-steering pump, and A/C compressor. A worn belt causes squealing (especially on cold starts), and a snapped belt can cause overheating and loss of charging and power steering at once. Inspect for cracks, glazing, or fraying; most belts last 80,000–160,000 km. Replacement is a moderate DIY job — the trickiest part is releasing the spring-loaded tensioner and routing the belt correctly, so photograph the routing diagram first.
DIY difficulty: Moderate DIY (note the belt routing first). Always confirm the correct part for your exact build by VIN before buying.
2016 Chevrolet Traverse specifications
| Specification | Value |
|---|---|
| Make | Chevrolet |
| Model | Traverse |
| Model Year | 2016 |
| Overall Length (mm) | 5170 |
| Overall Width (mm) | 1990 |
| Overall Height (mm) | 1780 |
| Wheelbase (mm) | 3020 |
| Curb Weight (kg) | 2197 |
| Front Track (mm) | 1180 |
| Rear Track (mm) | 2100 |
| Front Overhang (mm) | 390 |
| Rear Overhang (mm) | 910 |
| Wheelbase Detail (mm) | 1180 |
| Track Width (mm) | 1020 |
| Ground Clearance (mm) | 1130 |
| Models Chevrolet offered in 2016 | 35 |
Source: NHTSA vPIC / Canadian Vehicle Specifications database. Linear dimensions in mm; weight in kg. Your exact build may vary by trim and options — decode your VIN to confirm the correct serpentine belt.
Shop serpentine belt for your 2016 Chevrolet Traverse
Browse serpentine belt listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact serpentine belt by VIN
Search 1.2M+ parts filtered to your exact 2016 Chevrolet Traverse by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2016 Chevrolet Traverse — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What serpentine belt fit a 2016 Chevrolet Traverse?
The right serpentine belt for a 2016 Chevrolet Traverse depends on its exact factory configuration — trim, engine, and options — which year, make, and model alone don't capture. Its 5170 mm length and 3020 mm wheelbase (from NHTSA data) is part of why fitment varies. Enter your VIN on VinSnap to get parts matched at 99.8% fitment accuracy against a 1.2M+ catalog, instead of guessing from a dropdown.
How often should the serpentine belt on a 2016 Chevrolet Traverse be replaced?
The serpentine belt is a single belt that drives accessories like the alternator, water pump, power-steering pump, and A/C compressor. A worn belt causes squealing (especially on cold starts), and a snapped belt can cause overheating and loss of charging and power steering at once. For your specific 2016 Chevrolet Traverse, follow the maintenance schedule and confirm the correct part by VIN before buying.
Can I replace the serpentine belt on a 2016 Chevrolet Traverse myself?
Moderate DIY (note the belt routing first). Difficulty and the exact part number still depend on your 2016 Chevrolet Traverse's build, so decode your VIN on VinSnap to confirm the correct serpentine belt and avoid buying the wrong one.