What Headlight Bulbs Fit a 2016 Ford Explorer?
What decides headlight bulb fit on the 2016 Ford Explorer, where to find your VIN, and how to replace them.
VinSnap does not have a verified headlight bulb part number for the 2016 Ford Explorer yet. Which headlight bulbs fit depends on the bulb fitment code (for example H11 or 9005) and whether the headlight housing is halogen, HID or LED, so compare those on the part you are replacing. The 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb; it identifies the exact engine and trim.
Last updated: · Source: VinSnap
2016 Ford Explorer headlight bulbs: key facts
| Verified part number | None on file yet |
|---|---|
| Fit is decided by | The bulb fitment code (for example H11 or 9005) and whether the headlight housing is halogen, HID or LED |
| NHTSA recalls: lighting | None of 15 on record |
| DIY | Easy DIY (match the bulb fitment code) |
Sources: NHTSA recalls.
Headlight Bulbs: what it does & when to replace it
Headlight bulbs light the road ahead; a burnt-out bulb is both a safety hazard and a common cause of a failed inspection. Bulb type varies (halogen, HID/xenon, or LED) and must match the housing — the fitment code (e.g. H11, 9005) is vehicle-specific. Signs include one side dimmer or out, or flickering. Many halogen bulbs swap from behind the headlight in minutes, though tight engine bays can make access awkward. Avoid touching the glass of halogen bulbs with bare fingers, as skin oil shortens their life.
DIY difficulty: Easy DIY (match the bulb fitment code). Always confirm the correct part for your exact build by VIN before buying.
2016 Ford Explorer specifications
| Specification | Value |
|---|---|
| Make | Ford |
| Model | Explorer |
| Model Year | 2016 |
| Overall Length (mm) | 5040 |
| Overall Width (mm) | 2000 |
| Overall Height (mm) | 1770 |
| Wheelbase (mm) | 2870 |
| Curb Weight (kg) | 2146 |
| Front Bumper to Windshield Base (mm) | 1200 |
| Side Glass Height (mm) | 400 |
| Side Glass Base to Rocker Panel (mm) | 950 |
| Roof Width Between Side Rails (mm) | 1270 |
| Front Overhang (mm) | 980 |
| Rear Overhang (mm) | 1190 |
| Front Track Width (mm) | 1700 |
| Rear Track Width (mm) | 1700 |
| Weight Distribution, Front/Rear (%) | 54/46 |
| Models Ford offered in 2016 | 36 |
Source: NHTSA vPIC / Canadian Vehicle Specifications database. Linear dimensions in mm; weight in kg. Your exact build may vary by trim and options — decode your VIN to confirm the correct headlight bulbs.
How to replace the headlight bulbs on a 2016 Ford Explorer
- 1Open the hood and locate the back of the headlight housing.
- 2Disconnect the bulb’s electrical connector and release the retaining clip or twist-lock.
- 3Remove the old bulb without touching the glass of a halogen bulb with bare fingers.
- 4Fit the correct new bulb by its base only, secure the clip/lock, and reconnect the connector.
- 5Test the light before closing up; aim if needed.
⚠ Use the exact fitment code (e.g. H11, 9005) for your vehicle. Skin oil shortens halogen bulb life.
These are general steps for the lighting category. Exact fastener locations, torque values, and the correct part number depend on your 2016 Ford Explorer’s build — confirm by VIN before you start.
Shop headlight bulbs for your 2016 Ford Explorer
Browse headlight bulbs listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact headlight bulbs by VIN
Find parts for your exact 2016 Ford Explorer by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2016 Ford Explorer — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What headlight bulbs fit a 2016 Ford Explorer?
VinSnap has no verified headlight bulb part number for the 2016 Ford Explorer yet. Match on the bulb fitment code (for example H11 or 9005) and whether the headlight housing is halogen, HID or LED; the 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb, and it pins down the engine and trim.
How often should the headlight bulbs on a 2016 Ford Explorer be replaced?
Headlight bulbs light the road ahead; a burnt-out bulb is both a safety hazard and a common cause of a failed inspection. Bulb type varies (halogen, HID/xenon, or LED) and must match the housing — the fitment code (e.g. VinSnap has no manufacturer-specific interval on file for the 2016 Ford Explorer; the owner’s manual has the official schedule.
Can I replace the headlight bulbs on a 2016 Ford Explorer myself?
Easy DIY (match the bulb fitment code). Allow about 10–20 minutes. Tools: gloves, screwdriver (some housings). Use the exact fitment code (e.g. H11, 9005) for your vehicle. Skin oil shortens halogen bulb life.