What Oil Filter Fit a 2016 Lexus RX?
Oil Filter fitment for the 2016 Lexus RX — real NHTSA specs, replacement guidance, and how to find the exact guaranteed-fit part by VIN.
The correct oil filter for a 2016 Lexus RX is determined by its exact factory build, not just the year, make, and model. This 2016 Lexus RX is 4890 mm long with a 2790 mm wheelbase and weighs 2020 kg (NHTSA data), figures that influence which engine components were fitted from the factory. To get the exact guaranteed-fit oil filter, decode your 17-character VIN — it pins down the trim, engine, and options the year/make/model alone can't.
Last updated: · Source: NHTSA vPIC
Oil Filter: what it does & when to replace it
The oil filter removes metal particles, dirt, and combustion by-products from the engine oil so they do not circulate and cause wear. It is replaced at every oil change — typically every 8,000–16,000 km or per the maintenance schedule. A clogged filter can trigger the bypass valve, letting unfiltered oil through, which accelerates engine wear. Using the correct filter for the engine matters: thread size, gasket diameter, and bypass-valve spec vary. This is one of the easiest DIY jobs, done with the oil change using a filter wrench and a drain pan.
DIY difficulty: Easy DIY (with every oil change). Always confirm the correct part for your exact build by VIN before buying.
2016 Lexus RX specifications
| Specification | Value |
|---|---|
| Make | Lexus |
| Model | RX |
| Model Year | 2016 |
| Overall Length (mm) | 4890 |
| Overall Width (mm) | 1900 |
| Overall Height (mm) | 1720 |
| Wheelbase (mm) | 2790 |
| Curb Weight (kg) | 2020 |
| Front Track (mm) | 1280 |
| Rear Track (mm) | 1510 |
| Front Overhang (mm) | 380 |
| Rear Overhang (mm) | 910 |
| Wheelbase Detail (mm) | 1040 |
| Track Width (mm) | 1080 |
| Ground Clearance (mm) | 1020 |
| Models Lexus offered in 2016 | 11 |
Source: NHTSA vPIC / Canadian Vehicle Specifications database. Linear dimensions in mm; weight in kg. Your exact build may vary by trim and options — decode your VIN to confirm the correct oil filter.
How to replace the oil filter on a 2016 Lexus RX
- 1Warm the engine briefly, then raise and support the vehicle and place a drain pan under the sump.
- 2Remove the drain plug to drain the old oil, then locate and unscrew the old oil filter (oil will spill — keep the pan under it).
- 3Wipe the sealing surface clean and smear a little fresh oil on the new filter’s rubber gasket.
- 4Spin the new filter on hand-tight (about three-quarters of a turn past first contact — do not overtighten), and refit the drain plug.
- 5Refill with the correct grade and quantity of oil, run the engine, and check for leaks and the correct level.
⚠ Use the exact filter and oil spec for your engine — thread size and bypass valve vary.
These are general steps for the engine category. Exact fastener locations, torque values, and the correct part number depend on your 2016 Lexus RX’s build — confirm by VIN before you start.
Compatible parts for your 2016 Lexus RX
Real oil filter options catalogued for this 2016 Lexus RX (TecDoc), shown for the base engine (2.0000 L Petrol). Each links to live marketplace listings for that exact brand and part number.
| Brand | Part number | Note | Shop |
|---|---|---|---|
| 1A FIRST AUTOMOTIVE | E50392⇆ cross-ref |
Oil Filter | Find this part → |
| BLUE PRINT | ADT32120⇆ cross-ref |
Oil Filter | Find this part → |
| BOSCH | 0 986 AF0 009⇆ cross-ref |
Oil Filter | Find this part → |
| BOSCH | F 026 407 098⇆ cross-ref |
Oil Filter | Find this part → |
| FEBI BILSTEIN | 184180⇆ cross-ref |
Oil Filter | Find this part → |
| HELLA | 8ZO 358 325-161⇆ cross-ref |
Oil Filter | Find this part → |
Compatible options shown for the base engine — exact fit can vary by engine and trim; confirm with your VIN before buying. Part data: TecDoc catalogue.
Shop oil filter for your 2016 Lexus RX
Browse oil filter listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact oil filter by VIN
Search 1.2M+ parts filtered to your exact 2016 Lexus RX by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2016 Lexus RX — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What oil filter fit a 2016 Lexus RX?
The right oil filter for a 2016 Lexus RX depends on its exact factory configuration — trim, engine, and options — which year, make, and model alone don't capture. Its 4890 mm length and 2790 mm wheelbase (from NHTSA data) is part of why fitment varies. Enter your VIN on VinSnap to get parts matched at 99.8% fitment accuracy against a 1.2M+ catalog, instead of guessing from a dropdown.
How often should the oil filter on a 2016 Lexus RX be replaced?
The oil filter removes metal particles, dirt, and combustion by-products from the engine oil so they do not circulate and cause wear. It is replaced at every oil change — typically every 8,000–16,000 km or per the maintenance schedule. For your specific 2016 Lexus RX, follow the maintenance schedule and confirm the correct part by VIN before buying.
Can I replace the oil filter on a 2016 Lexus RX myself?
Easy DIY (with every oil change). Difficulty and the exact part number still depend on your 2016 Lexus RX's build, so decode your VIN on VinSnap to confirm the correct oil filter and avoid buying the wrong one.