What Wiper Blades Fit a 2016 Mazda Mazda3?
What decides wiper blade fit on the 2016 Mazda Mazda3, where to find your VIN, and how to replace them.
VinSnap does not have a verified wiper blade part number for the 2016 Mazda Mazda3 yet. Which wiper blades fit depends on the driver- and passenger-side blade lengths (often different) and the wiper-arm connector type, so compare those on the part you are replacing. The 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb; it identifies the exact engine and trim.
Last updated: · Source: VinSnap
2016 Mazda Mazda3 wiper blades: key facts
| Verified part number | None on file yet |
|---|---|
| Fit is decided by | The driver- and passenger-side blade lengths (often different) and the wiper-arm connector type |
| NHTSA recalls: visibility system (wipers, washers and defrost) | 1 of 6 for this model |
| DIY | Very easy DIY (under a minute, no tools) |
Sources: NHTSA recalls.
Wiper Blades: what it does & when to replace it
Wiper blades clear rain, snow, and debris from the windshield for visibility. The rubber edge degrades from sun and use; most blades need replacing every 6–12 months. Replacement signs include streaking, skipping, chattering, or squeaking across the glass. Blade length is specific per vehicle and the driver and passenger sides are often different lengths. This is the single easiest car-maintenance task — most blades clip on in under a minute with no tools — and a clear safety upgrade that is frequently neglected.
DIY difficulty: Very easy DIY (under a minute, no tools). Always confirm the correct part for your exact build by VIN before buying.
2016 Mazda Mazda3 specifications
| Specification | Value |
|---|---|
| Make | Mazda |
| Model | Mazda3 |
| Model Year | 2016 |
| Overall Length (mm) | 4580 |
| Overall Width (mm) | 1800 |
| Overall Height (mm) | 1460 |
| Wheelbase (mm) | 2700 |
| Curb Weight (kg) | 1383 |
| Front Bumper to Windshield Base (mm) | 1280 |
| Side Glass Height (mm) | 320 |
| Side Glass Base to Rocker Panel (mm) | 790 |
| Roof Width Between Side Rails (mm) | 1130 |
| Front Overhang (mm) | 930 |
| Rear Overhang (mm) | 960 |
| Front Track Width (mm) | 1560 |
| Rear Track Width (mm) | 1560 |
| Weight Distribution, Front/Rear (%) | 60/40 |
| Models Mazda offered in 2016 | 7 |
Source: NHTSA vPIC / Canadian Vehicle Specifications database. Linear dimensions in mm; weight in kg. Your exact build may vary by trim and options — decode your VIN to confirm the correct wiper blades.
How to replace the wiper blades on a 2016 Mazda Mazda3
- 1Lift the wiper arm away from the windshield until it locks upright.
- 2Press the release tab where the blade meets the arm and slide the old blade off the hook.
- 3Slide the new blade on until it clicks, matching the driver and passenger blade lengths (often different).
- 4Lower the arm gently back onto the glass and test the wipers.
⚠ Driver and passenger blades are frequently different lengths — confirm both sizes for your vehicle.
These are general steps for the exterior category. Exact fastener locations, torque values, and the correct part number depend on your 2016 Mazda Mazda3’s build — confirm by VIN before you start.
Shop wiper blades for your 2016 Mazda Mazda3
Browse wiper blades listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact wiper blades by VIN
Find parts for your exact 2016 Mazda Mazda3 by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2016 Mazda Mazda3 — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What wiper blades fit a 2016 Mazda Mazda3?
VinSnap has no verified wiper blade part number for the 2016 Mazda Mazda3 yet. Match on the driver- and passenger-side blade lengths (often different) and the wiper-arm connector type; the 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb, and it pins down the engine and trim.
How often should the wiper blades on a 2016 Mazda Mazda3 be replaced?
Wiper blades clear rain, snow, and debris from the windshield for visibility. The rubber edge degrades from sun and use; most blades need replacing every 6–12 months. VinSnap has no manufacturer-specific interval on file for the 2016 Mazda Mazda3; the owner’s manual has the official schedule.
Can I replace the wiper blades on a 2016 Mazda Mazda3 myself?
Very easy DIY (under a minute, no tools). Allow under 2 minutes per blade. Tools: none. Driver and passenger blades are frequently different lengths — confirm both sizes for your vehicle.
Are there recalls on the 2016 Mazda Mazda3’s visibility system (wipers, washers and defrost)?
Yes. NHTSA lists 1 recall for the 2016 Mazda Mazda3 filed under the visibility system (wipers, washers and defrost): 19V272000 (2019-04-04), visibility / windshield wiper/washer. Recall repairs are free at a franchised Mazda dealer.