What Fuel Filter Fits a 2018 Toyota Tacoma?
Fuel filter part numbers catalogued for the 2018 Toyota Tacoma (2.7 L petrol, 4-cyl, 160 hp), the engine variants that change them, and how to replace it.
For the 2018 Toyota Tacoma with the 2.7 L petrol, 4-cyl, 160 hp engine, the parts catalogue lists MANN-FILTER WK 612/7 as a fuel filter. The 2018 Tacoma was built with 2 engine variants (from 2.7 L to 3.5 L); this part number is catalogued for the 2.7 L petrol, and other engines can take a different fuel filter.
Last updated: · Source: aftermarket parts catalogue
2018 Toyota Tacoma fuel filter: key facts
| Catalogued engine | 2.7 L petrol, 4-cyl, 160 hp |
|---|---|
| Part numbers | WK 612/7 (MANN-FILTER) |
| Catalogue listings | 1 fuel filter, 1 brand |
| Engine variants (2018) | 2, from 2.7 L to 3.5 L |
| Fit is decided by | The engine and fuel type, and whether the filter is inline or built into the in-tank pump module |
| NHTSA recalls: fuel system | 2 of 3 for this model |
| DIY | Moderate DIY (relieve fuel pressure first) |
Sources: aftermarket parts catalogue (part numbers, engines), NHTSA recalls.
Fuel Filter: what it does & when to replace it
The fuel filter traps rust, dirt, and sediment before fuel reaches the injectors. A clogged filter causes hard starting, hesitation, power loss under load, or stalling. Service intervals vary widely: some are a maintenance item replaced every 50,000–100,000 km, while many modern cars use a lifetime filter built into the in-tank fuel pump module. Difficulty depends on location — an inline filter is a moderate DIY job, but relieving fuel-system pressure safely is essential and an in-tank filter is usually a shop job.
DIY difficulty: Moderate DIY (relieve fuel pressure first). Always confirm the correct part for your exact build by VIN before buying.
Which engine does your 2018 Toyota Tacoma have?
The 2018 Toyota Tacoma was sold with 2 engine variants, and the correct fuel filter can differ between them. This is the single thing a year/make/model dropdown cannot tell you.
| Engine | Fuel | Cylinders | Years |
|---|---|---|---|
| 2.7 L 160 hp | Petrol | 4 | 2015–now |
| 3.5 L 282 hp | Petrol | 6 | 2015–now |
Engine variants catalogued for this model (parts catalogue), filtered to those built around 2018. We hold catalogued part numbers for the base engine only — decode your VIN and we resolve your exact engine, then the exact part. Full dimensions and specifications for this vehicle are on the 2018 Toyota Tacoma overview.
How to replace the fuel filter on a 2018 Toyota Tacoma
- 1Relieve the fuel-system pressure first (pull the fuel-pump fuse and run the engine until it stalls, or follow the service procedure).
- 2Place a pan/rags under the filter to catch spilled fuel and note the flow-direction arrow on the filter.
- 3Disconnect the fuel lines from the old inline filter and remove it from its bracket.
- 4Fit the new filter with the flow arrow pointing toward the engine, and reconnect both lines until they click.
- 5Restore the fuse, cycle the ignition to prime, and check thoroughly for leaks before driving.
⚠ Fuel is flammable and under pressure — relieve pressure first and work in a ventilated area. In-tank filters are usually a shop job.
These are general steps for the fuel system category. Exact fastener locations, torque values, and the correct part number depend on your 2018 Toyota Tacoma’s build — confirm by VIN before you start.
Compatible parts for your 2018 Toyota Tacoma
Real fuel filter options catalogued for this 2018 Toyota Tacoma (parts catalogue), shown for the base engine (2.7000 L Petrol). Each links to live marketplace listings for that exact brand and part number.
| Brand | Part number | Note | Shop |
|---|---|---|---|
| MANN-FILTER | WK 612/7⇆ cross-ref |
Fuel Filter | Find this part → |
Compatible options shown for the base engine — exact fit can vary by engine and trim; confirm with your VIN before buying. Part data: aftermarket parts catalogue.
Shop fuel filter for your 2018 Toyota Tacoma
Browse fuel filter listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact fuel filter by VIN
Find parts for your exact 2018 Toyota Tacoma by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2018 Toyota Tacoma — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What fuel filter fits a 2018 Toyota Tacoma?
For the 2018 Toyota Tacoma with the 2.7 L petrol, 4-cyl, 160 hp engine, the parts catalogue lists MANN-FILTER WK 612/7 as a fuel filter. The 2018 Tacoma was built with 2 engine variants (from 2.7 L to 3.5 L); this part number is catalogued for the 2.7 L petrol, and other engines can take a different fuel filter.
How often should the fuel filter on a 2018 Toyota Tacoma be replaced?
The fuel filter traps rust, dirt, and sediment before fuel reaches the injectors. A clogged filter causes hard starting, hesitation, power loss under load, or stalling. VinSnap has no manufacturer-specific interval on file for the 2018 Toyota Tacoma; the owner’s manual has the official schedule.
Can I replace the fuel filter on a 2018 Toyota Tacoma myself?
Moderate DIY (relieve fuel pressure first). Allow about 45–60 minutes (inline filter). Tools: line-disconnect tools, drain pan, rags, eye protection. Fuel is flammable and under pressure — relieve pressure first and work in a ventilated area. In-tank filters are usually a shop job.
Are there recalls on the 2018 Toyota Tacoma’s fuel system?
Yes. NHTSA lists 2 recalls for the 2018 Toyota Tacoma filed under the fuel system: 20V682000 (2020-11-04), fuel system, gasoline / delivery / fuel pump; 20V012000 (2020-01-13), fuel system, gasoline / delivery / fuel pump. Recall repairs are free at a franchised Toyota dealer.