What Water Pump Fits a 2018 Toyota Tacoma?
Water pump part numbers catalogued for the 2018 Toyota Tacoma (2.7 L petrol, 4-cyl, 160 hp), the engine variants that change them, and how to replace it.
The 2018 Toyota Tacoma with the 2.7 L petrol, 4-cyl, 160 hp engine takes water pumps such as GATES WP0254, SKF VKPC 91826 and GATES-SEA GWP-0009 (aftermarket parts catalogue). The catalogue lists 4 water pumps from 4 brands for this engine. The 2018 Tacoma was built with 2 engine variants (from 2.7 L to 3.5 L); these part numbers are catalogued for the 2.7 L petrol, and other engines can take a different water pump.
Last updated: · Source: aftermarket parts catalogue
2018 Toyota Tacoma water pump: key facts
| Catalogued engine | 2.7 L petrol, 4-cyl, 160 hp |
|---|---|
| Part numbers | WP0254 (GATES); VKPC 91826 (SKF); GWP-0009 (GATES-SEA); TW-5147 (KAVO PARTS) |
| Catalogue listings | 4 water pumps, 4 brands |
| Engine variants (2018) | 2, from 2.7 L to 3.5 L |
| Fit is decided by | The engine code and how the pump is driven (timing belt, timing chain or accessory belt) |
| NHTSA recalls: engine and engine cooling | None of 3 on record |
| DIY | Advanced DIY (often done with timing belt) |
Sources: aftermarket parts catalogue (part numbers, engines), NHTSA recalls.
Water Pump: what it does & when to replace it
The water pump circulates coolant through the engine and radiator to keep temperatures in check. Failure signs include coolant leaking from the pump weep hole, a whining or grinding bearing noise, overheating, or coolant pooling at the front of the engine. On many engines the pump is driven by the timing belt, so it is commonly replaced together with the timing belt to save labor. This is an advanced DIY or shop job — access is often deep in the engine and incorrect coolant bleeding can cause overheating.
DIY difficulty: Advanced DIY (often done with timing belt). Always confirm the correct part for your exact build by VIN before buying.
Which engine does your 2018 Toyota Tacoma have?
The 2018 Toyota Tacoma was sold with 2 engine variants, and the correct water pump can differ between them. This is the single thing a year/make/model dropdown cannot tell you.
| Engine | Fuel | Cylinders | Years |
|---|---|---|---|
| 2.7 L 160 hp | Petrol | 4 | 2015–now |
| 3.5 L 282 hp | Petrol | 6 | 2015–now |
Engine variants catalogued for this model (parts catalogue), filtered to those built around 2018. We hold catalogued part numbers for the base engine only — decode your VIN and we resolve your exact engine, then the exact part. Full dimensions and specifications for this vehicle are on the 2018 Toyota Tacoma overview.
How to replace the water pump on a 2018 Toyota Tacoma
- 1With the engine cold, drain the coolant and remove any covers, belts, or the timing belt as needed to reach the pump.
- 2Unbolt the old water pump and remove it, then clean the mating surface completely of old gasket material.
- 3Fit the new pump with a fresh gasket/seal, torquing the bolts evenly to spec.
- 4Reassemble the belt(s)/timing components, hoses, and covers.
- 5Refill and bleed the cooling system, then run the engine and verify no leaks and normal temperature.
⚠ Often driven by the timing belt — replace both together. Incorrect bleeding causes overheating.
These are general steps for the cooling category. Exact fastener locations, torque values, and the correct part number depend on your 2018 Toyota Tacoma’s build — confirm by VIN before you start.
Compatible parts for your 2018 Toyota Tacoma
Real water pump options catalogued for this 2018 Toyota Tacoma (parts catalogue), shown for the base engine (2.7000 L Petrol). Each links to live marketplace listings for that exact brand and part number.
| Brand | Part number | Note | Shop |
|---|---|---|---|
| GATES | WP0254⇆ cross-ref |
Water Pump, engine cooling | Find this part → |
| SKF | VKPC 91826⇆ cross-ref |
Water Pump, engine cooling | Find this part → |
| GATES-SEA | GWP-0009⇆ cross-ref |
Water Pump, engine cooling | Find this part → |
| KAVO PARTS | TW-5147⇆ cross-ref |
Water Pump, engine cooling | Find this part → |
Compatible options shown for the base engine — exact fit can vary by engine and trim; confirm with your VIN before buying. Part data: aftermarket parts catalogue.
Shop water pump for your 2018 Toyota Tacoma
Browse water pump listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact water pump by VIN
Find parts for your exact 2018 Toyota Tacoma by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2018 Toyota Tacoma — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What water pump fits a 2018 Toyota Tacoma?
The 2018 Toyota Tacoma with the 2.7 L petrol, 4-cyl, 160 hp engine takes water pumps such as GATES WP0254, SKF VKPC 91826 and GATES-SEA GWP-0009 (aftermarket parts catalogue). The 2018 Tacoma was built with 2 engine variants (from 2.7 L to 3.5 L); these part numbers are catalogued for the 2.7 L petrol, and other engines can take a different water pump.
Which brands make water pumps for the 2018 Toyota Tacoma?
For the 2.7 L petrol engine, the catalogue lists 4 water pumps from 4 brands: GATES, GATES-SEA, KAVO PARTS and SKF.
How often should the water pump on a 2018 Toyota Tacoma be replaced?
The water pump circulates coolant through the engine and radiator to keep temperatures in check. Failure signs include coolant leaking from the pump weep hole, a whining or grinding bearing noise, overheating, or coolant pooling at the front of the engine. VinSnap has no manufacturer-specific interval on file for the 2018 Toyota Tacoma; the owner’s manual has the official schedule.
Can I replace the water pump on a 2018 Toyota Tacoma myself?
Advanced DIY (often done with timing belt). Allow about 3–5 hours. Tools: drain pan, socket set, torque wrench, gasket scraper, fresh coolant. Often driven by the timing belt — replace both together. Incorrect bleeding causes overheating.