What Starter Motor Fit a 2019 Dodge Charger?
Starter Motor fitment for the 2019 Dodge Charger — real NHTSA specs, replacement guidance, and how to find the exact guaranteed-fit part by VIN.
The correct starter motor for a 2019 Dodge Charger is determined by its exact factory build, not just the year, make, and model. This 2019 Dodge Charger is 5040 mm long with a 3050 mm wheelbase and weighs 1886 kg (NHTSA data), figures that influence which electrical components were fitted from the factory. To get the exact guaranteed-fit starter motor, decode your 17-character VIN — it pins down the trim, engine, and options the year/make/model alone can't.
Last updated: · Source: NHTSA vPIC
Starter Motor: what it does & when to replace it
The starter motor cranks the engine to get it running. Failure signs include a single click (or rapid clicking) when you turn the key, intermittent no-start, or a grinding noise during starting. A starter that works when cold but fails when hot is a classic sign of an aging unit. Replacement difficulty varies dramatically by vehicle — some starters are easily accessible, others are buried under the intake. Confirm the battery and connections are good first, since a weak battery mimics a bad starter. Often a job better suited to an experienced DIYer or a shop.
DIY difficulty: Advanced DIY (access varies widely). Always confirm the correct part for your exact build by VIN before buying.
2019 Dodge Charger specifications
| Specification | Value |
|---|---|
| Make | Dodge |
| Model | Charger |
| Model Year | 2019 |
| Overall Length (mm) | 5040 |
| Overall Width (mm) | 1910 |
| Overall Height (mm) | 1480 |
| Wheelbase (mm) | 3050 |
| Curb Weight (kg) | 1886 |
| Front Track (mm) | 1360 |
| Rear Track (mm) | 710 |
| Front Overhang (mm) | 340 |
| Rear Overhang (mm) | 840 |
| Wheelbase Detail (mm) | 1170 |
| Track Width (mm) | 890 |
| Ground Clearance (mm) | 1100 |
| Models Dodge offered in 2019 | 9 |
Source: NHTSA vPIC / Canadian Vehicle Specifications database. Linear dimensions in mm; weight in kg. Your exact build may vary by trim and options — decode your VIN to confirm the correct starter motor.
How to replace the starter motor on a 2019 Dodge Charger
- 1Confirm the battery and connections are good first — a weak battery mimics a bad starter.
- 2Disconnect the battery negative terminal.
- 3Locate the starter (often low on the engine/transmission bellhousing) and disconnect its wiring, noting positions.
- 4Unbolt and remove the old starter, supporting its weight as the last bolt comes out.
- 5Fit the new starter, torque the bolts, reconnect the wiring and battery, and test-start.
⚠ Access varies dramatically — some starters are buried under the intake and are a shop job.
These are general steps for the electrical category. Exact fastener locations, torque values, and the correct part number depend on your 2019 Dodge Charger’s build — confirm by VIN before you start.
Compatible parts for your 2019 Dodge Charger
Real starter motor options catalogued for this 2019 Dodge Charger (TecDoc), shown for the base engine (3.6000 L Petrol). Each links to live marketplace listings for that exact brand and part number.
| Brand | Part number | Note | Shop |
|---|---|---|---|
| STARDAX | STX210339R⇆ cross-ref |
Starter | Find this part → |
| VALEO | 460424⇆ cross-ref |
Starter | Find this part → |
| WAI | 19205N⇆ cross-ref |
Starter | Find this part → |
Compatible options shown for the base engine — exact fit can vary by engine and trim; confirm with your VIN before buying. Part data: TecDoc catalogue.
Shop starter motor for your 2019 Dodge Charger
Browse starter motor listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact starter motor by VIN
Search 1.2M+ parts filtered to your exact 2019 Dodge Charger by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2019 Dodge Charger — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What starter motor fit a 2019 Dodge Charger?
The right starter motor for a 2019 Dodge Charger depends on its exact factory configuration — trim, engine, and options — which year, make, and model alone don't capture. Its 5040 mm length and 3050 mm wheelbase (from NHTSA data) is part of why fitment varies. Enter your VIN on VinSnap to get parts matched at 99.8% fitment accuracy against a 1.2M+ catalog, instead of guessing from a dropdown.
How often should the starter motor on a 2019 Dodge Charger be replaced?
The starter motor cranks the engine to get it running. Failure signs include a single click (or rapid clicking) when you turn the key, intermittent no-start, or a grinding noise during starting. For your specific 2019 Dodge Charger, follow the maintenance schedule and confirm the correct part by VIN before buying.
Can I replace the starter motor on a 2019 Dodge Charger myself?
Advanced DIY (access varies widely). Difficulty and the exact part number still depend on your 2019 Dodge Charger's build, so decode your VIN on VinSnap to confirm the correct starter motor and avoid buying the wrong one.