What Water Pump Fits a 2019 Kia Sorento?
What decides water pump fit on the 2019 Kia Sorento, where to find your VIN, and how to replace it.
VinSnap does not have a verified water pump part number for the 2019 Kia Sorento yet. Which water pump fits depends on the engine code and how the pump is driven (timing belt, timing chain or accessory belt), so compare those on the part you are replacing. The 2019 Sorento was built with 17 engine variants (from 2.0 L to 3.5 L), so the right water pump depends on which one yours has. The 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb; it identifies the exact engine and trim.
Last updated: · Source: aftermarket parts catalogue (engines)
2019 Kia Sorento water pump: key facts
| Verified part number | None on file yet |
|---|---|
| Engine variants (2019) | 17, from 2.0 L to 3.5 L |
| Fit is decided by | The engine code and how the pump is driven (timing belt, timing chain or accessory belt) |
| NHTSA recalls: engine and engine cooling | None of 2 on record |
| DIY | Advanced DIY (often done with timing belt) |
Sources: aftermarket parts catalogue (engines), NHTSA recalls.
Water Pump: what it does & when to replace it
The water pump circulates coolant through the engine and radiator to keep temperatures in check. Failure signs include coolant leaking from the pump weep hole, a whining or grinding bearing noise, overheating, or coolant pooling at the front of the engine. On many engines the pump is driven by the timing belt, so it is commonly replaced together with the timing belt to save labor. This is an advanced DIY or shop job — access is often deep in the engine and incorrect coolant bleeding can cause overheating.
DIY difficulty: Advanced DIY (often done with timing belt). Always confirm the correct part for your exact build by VIN before buying.
Which engine does your 2019 Kia Sorento have?
The 2019 Kia Sorento was sold with 17 engine variants, and the correct water pump can differ between them. This is the single thing a year/make/model dropdown cannot tell you.
| Engine | Fuel | Cylinders | Years |
|---|---|---|---|
| 2.2 L 200 hp | Diesel | 4 | 2015–2020 |
| 2.4 L 172 hp | Petrol | 4 | 2015–2020 |
| 2.4 L 175 hp | Petrol | 4 | 2015–2020 |
| 2.2 L 197 hp | Diesel | 4 | 2016–2020 |
| 2.0 L 186 hp | Diesel | 4 | 2015–2020 |
| 2.2 L 193 hp | Diesel | 4 | 2016–2020 |
| 2.4 L 174 hp | Petrol | 4 | 2015–2020 |
| 2.2 L 194 hp | Diesel | 4 | 2015–2020 |
| 3.3 L 266 hp | Petrol | 6 | 2015–2020 |
| 2.0 L 185 hp | Diesel | 4 | 2015–2020 |
| 2.2 L 202 hp | Diesel | 4 | 2015–2020 |
| 3.3 L 290 hp | Petrol | 6 | 2016–2020 |
| 3.5 L 280 hp | Petrol | 6 | 2017–2020 |
| 3.5 L 276 hp | Petrol | 6 | 2017–2020 |
| 3.3 L 250 hp | Petrol | 6 | 2015–2020 |
| 3.5 L 249 hp | Petrol | 6 | 2018–2020 |
| 2.4 L 190 hp | Petrol | 4 | 2017–2020 |
Engine variants catalogued for this model (parts catalogue), filtered to those built around 2019. We hold catalogued part numbers for the base engine only — decode your VIN and we resolve your exact engine, then the exact part. Full dimensions and specifications for this vehicle are on the 2019 Kia Sorento overview.
How to replace the water pump on a 2019 Kia Sorento
- 1With the engine cold, drain the coolant and remove any covers, belts, or the timing belt as needed to reach the pump.
- 2Unbolt the old water pump and remove it, then clean the mating surface completely of old gasket material.
- 3Fit the new pump with a fresh gasket/seal, torquing the bolts evenly to spec.
- 4Reassemble the belt(s)/timing components, hoses, and covers.
- 5Refill and bleed the cooling system, then run the engine and verify no leaks and normal temperature.
⚠ Often driven by the timing belt — replace both together. Incorrect bleeding causes overheating.
These are general steps for the cooling category. Exact fastener locations, torque values, and the correct part number depend on your 2019 Kia Sorento’s build — confirm by VIN before you start.
Shop water pump for your 2019 Kia Sorento
Browse water pump listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact water pump by VIN
Find parts for your exact 2019 Kia Sorento by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2019 Kia Sorento — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What water pump fits a 2019 Kia Sorento?
VinSnap has no verified water pump part number for the 2019 Kia Sorento yet. Match on the engine code and how the pump is driven (timing belt, timing chain or accessory belt); the 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb, and it pins down the engine and trim.
How often should the water pump on a 2019 Kia Sorento be replaced?
The water pump circulates coolant through the engine and radiator to keep temperatures in check. Failure signs include coolant leaking from the pump weep hole, a whining or grinding bearing noise, overheating, or coolant pooling at the front of the engine. VinSnap has no manufacturer-specific interval on file for the 2019 Kia Sorento; the owner’s manual has the official schedule.
Can I replace the water pump on a 2019 Kia Sorento myself?
Advanced DIY (often done with timing belt). Allow about 3–5 hours. Tools: drain pan, socket set, torque wrench, gasket scraper, fresh coolant. Often driven by the timing belt — replace both together. Incorrect bleeding causes overheating.