What Spark Plugs Fit a 2019 Mazda CX-5?
What decides spark plug fit on the 2019 Mazda CX-5, where to find your VIN, and how to replace them.
VinSnap does not have a verified spark plug part number for the 2019 Mazda CX-5 yet. Which spark plugs fit depends on the engine, the thread size and reach, the heat range and the electrode gap, so compare those on the part you are replacing. The 2019 CX-5 was built with 19 engine variants (from 2.0 L to 2.5 L), so the right spark plug depends on which one yours has. The 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb; it identifies the exact engine and trim.
Last updated: · Source: aftermarket parts catalogue (engines)
2019 Mazda CX-5 spark plugs: key facts
| Verified part number | None on file yet |
|---|---|
| Engine variants (2019) | 19, from 2.0 L to 2.5 L |
| Fit is decided by | The engine, the thread size and reach, the heat range and the electrode gap |
| NHTSA recalls: engine | 1 of 2 for this model |
| DIY | Moderate DIY (gap matters; harder on V-engines) |
Sources: aftermarket parts catalogue (engines), NHTSA recalls.
Spark Plugs: what it does & when to replace it
Spark plugs ignite the air-fuel mixture in each cylinder. Worn plugs cause rough idle, misfires, hard starting, hesitation, and reduced fuel economy. Service intervals vary widely by plug type: copper plugs last around 50,000 km, while iridium and platinum plugs can last 100,000–160,000 km. Always match the manufacturer heat range and gap. Replacement is a moderate DIY job — straightforward on inline engines but harder on V-engines where the rear bank is hard to reach. Electric vehicles do not use spark plugs at all.
DIY difficulty: Moderate DIY (gap matters; harder on V-engines). Always confirm the correct part for your exact build by VIN before buying.
Which engine does your 2019 Mazda CX-5 have?
The 2019 Mazda CX-5 was sold with 19 engine variants, and the correct spark plugs can differ between them. This is the single thing a year/make/model dropdown cannot tell you.
| Engine | Fuel | Cylinders | Years |
|---|---|---|---|
| 2.0 L 165 hp | Petrol | 4 | 2017–now |
| 2.0 L 160 hp | Petrol | 4 | 2017–now |
| 2.5 L 194 hp | Petrol | 4 | 2017–now |
| 2.0 L 155 hp | Petrol | 4 | 2016–now |
| 2.5 L 190 hp | Petrol | 4 | 2016–now |
| 2.5 L 184 hp | Petrol | 4 | 2016–now |
| 2.2 L 175 hp | Diesel | 4 | 2016–now |
| 2.5 L 188 hp | Petrol | 4 | 2017–now |
| 2.5 L 192 hp | Petrol | 4 | 2017–now |
| 2.2 L 190 hp | Diesel | 4 | 2018–now |
| 2.0 L 154 hp | Petrol | 4 | 2018–now |
| 2.2 L 188 hp | Diesel | 4 | 2018–now |
| 2.2 L 184 hp | Diesel | 4 | 2018–now |
| 2.0 L 150 hp | Petrol | 4 | 2018–now |
| 2.0 L 163 hp | Petrol | 4 | 2018–now |
| 2.5 L 230 hp | Petrol | 4 | 2018–now |
| 2.5 L 231 hp | Petrol | 4 | 2018–now |
| 2.5 L 253 hp | Petrol | 4 | 2018–now |
| 2.0 L 156 hp | Petrol | 4 | 2017–2023 |
Engine variants catalogued for this model (parts catalogue), filtered to those built around 2019. We hold catalogued part numbers for the base engine only — decode your VIN and we resolve your exact engine, then the exact part. Full dimensions and specifications for this vehicle are on the 2019 Mazda CX-5 overview.
How to replace the spark plugs on a 2019 Mazda CX-5
- 1With the engine cool, remove the engine cover and disconnect one coil pack or plug lead at a time (do them one at a time to keep firing order).
- 2Blow out debris from the plug well, then unscrew the old plug with a spark plug socket.
- 3Check the new plug’s gap against the manufacturer spec and adjust only if needed.
- 4Thread the new plug in by hand to avoid cross-threading, then torque it to spec.
- 5Reconnect the coil/lead (a dab of dielectric grease helps) and repeat for each cylinder.
⚠ Match the exact plug and heat range for your engine; V-engines’ rear bank can be hard to reach.
These are general steps for the ignition category. Exact fastener locations, torque values, and the correct part number depend on your 2019 Mazda CX-5’s build — confirm by VIN before you start.
Shop spark plugs for your 2019 Mazda CX-5
Browse spark plugs listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact spark plugs by VIN
Find parts for your exact 2019 Mazda CX-5 by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2019 Mazda CX-5 — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What spark plugs fit a 2019 Mazda CX-5?
VinSnap has no verified spark plug part number for the 2019 Mazda CX-5 yet. Match on the engine, the thread size and reach, the heat range and the electrode gap; the 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb, and it pins down the engine and trim.
How often should the spark plugs on a 2019 Mazda CX-5 be replaced?
Spark plugs ignite the air-fuel mixture in each cylinder. Worn plugs cause rough idle, misfires, hard starting, hesitation, and reduced fuel economy. VinSnap has no manufacturer-specific interval on file for the 2019 Mazda CX-5; the owner’s manual has the official schedule.
Can I replace the spark plugs on a 2019 Mazda CX-5 myself?
Moderate DIY (gap matters; harder on V-engines). Allow about 1 hour. Tools: spark plug socket, ratchet + extension, torque wrench, gap gauge, dielectric grease. Match the exact plug and heat range for your engine; V-engines’ rear bank can be hard to reach.
Are there recalls on the 2019 Mazda CX-5’s engine?
Yes. NHTSA lists 1 recall for the 2019 Mazda CX-5 filed under the engine: 19V497000 (2019-06-27), engine. Recall repairs are free at a franchised Mazda dealer.