What 12V Battery Fits a 2020 Kia Telluride?
What decides 12V battery fit on the 2020 Kia Telluride, where to find your VIN, and how to replace it.
VinSnap does not have a verified 12V battery part number for the 2020 Kia Telluride yet. Which 12V battery fits depends on the group size, the terminal layout, the cold-cranking amps (CCA) and whether start-stop needs an AGM or EFB battery, so compare those on the part you are replacing. The catalogue lists one engine for the 2020 Telluride (3.8 L 295 hp petrol); trim and options can still change the part. The 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb; it identifies the exact engine and trim.
Last updated: · Source: aftermarket parts catalogue (engines)
2020 Kia Telluride 12V battery: key facts
| Verified part number | None on file yet |
|---|---|
| Engine variants (2020) | 3.8 L 295 hp petrol |
| Fit is decided by | The group size, the terminal layout, the cold-cranking amps (CCA) and whether start-stop needs an AGM or EFB battery |
| NHTSA recalls: electrical system | 1 of 7 for this model |
| DIY | Easy DIY (some cars need battery registration) |
Sources: aftermarket parts catalogue (engines), NHTSA recalls.
12V Battery: what it does & when to replace it
The 12V battery supplies the current to start the engine and powers electronics when the engine is off. Most last 3–5 years. Warning signs include slow cranking, dim headlights at idle, dashboard warnings, or needing a jump-start. Group size, terminal layout, and cold-cranking-amp (CCA) rating must match the vehicle. Replacement is an easy DIY job — disconnect negative first, then positive — but on many modern cars the battery must be registered/coded to the charging system, which may require a shop tool. Hybrids and EVs also have a separate 12V battery in addition to the high-voltage pack.
DIY difficulty: Easy DIY (some cars need battery registration). Always confirm the correct part for your exact build by VIN before buying.
2020 Kia Telluride specifications
| Specification | Value |
|---|---|
| Make | Kia |
| Model | Telluride |
| Model Year | 2020 |
| Overall Length (mm) | 5000 |
| Overall Width (mm) | 1990 |
| Overall Height (mm) | 1760 |
| Wheelbase (mm) | 2900 |
| Curb Weight (kg) | 1970 |
| Front Bumper to Windshield Base (mm) | 1300 |
| Side Glass Height (mm) | 420 |
| Side Glass Base to Rocker Panel (mm) | 990 |
| Roof Width Between Side Rails (mm) | 1140 |
| Front Overhang (mm) | 950 |
| Rear Overhang (mm) | 1150 |
| Front Track Width (mm) | 1700 |
| Rear Track Width (mm) | 1700 |
| Weight Distribution, Front/Rear (%) | 57/43 |
| Models Kia offered in 2020 | 13 |
Source: NHTSA vPIC / Canadian Vehicle Specifications database. Linear dimensions in mm; weight in kg. Your exact build may vary by trim and options — decode your VIN to confirm the correct 12V battery.
How to replace the 12V battery on a 2020 Kia Telluride
- 1Turn off the engine. Disconnect the NEGATIVE (−) terminal first, then the POSITIVE (+).
- 2Remove the battery hold-down clamp and lift the old battery out (they are heavy — keep it upright).
- 3Clean the tray and terminals, then set the new battery in with the same terminal orientation.
- 4Reconnect POSITIVE (+) first, then NEGATIVE (−), and refit the hold-down clamp snugly.
- 5On many modern cars, register/code the new battery to the charging system with a diagnostic tool.
⚠ Match group size and CCA. Many cars require battery registration or they under-charge the new battery.
These are general steps for the electrical category. Exact fastener locations, torque values, and the correct part number depend on your 2020 Kia Telluride’s build — confirm by VIN before you start.
Shop 12V battery for your 2020 Kia Telluride
Browse 12V battery listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact 12V battery by VIN
Find parts for your exact 2020 Kia Telluride by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2020 Kia Telluride — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What 12V battery fits a 2020 Kia Telluride?
VinSnap has no verified 12V battery part number for the 2020 Kia Telluride yet. Match on the group size, the terminal layout, the cold-cranking amps (CCA) and whether start-stop needs an AGM or EFB battery; the 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb, and it pins down the engine and trim.
How often should the 12V battery on a 2020 Kia Telluride be replaced?
The 12V battery supplies the current to start the engine and powers electronics when the engine is off. Most last 3–5 years. VinSnap has no manufacturer-specific interval on file for the 2020 Kia Telluride; the owner’s manual has the official schedule.
Can I replace the 12V battery on a 2020 Kia Telluride myself?
Easy DIY (some cars need battery registration). Allow about 20–30 minutes. Tools: socket/wrench set, battery terminal brush, gloves + eye protection. Match group size and CCA. Many cars require battery registration or they under-charge the new battery.
Are there recalls on the 2020 Kia Telluride’s electrical system?
Yes. NHTSA lists 1 recall for the 2020 Kia Telluride filed under the electrical system: 20V436000 (2020-07-28), electrical system / wiring. Recall repairs are free at a franchised Kia dealer.