What Water Pump Fits a 2020 Nissan Altima?
What decides water pump fit on the 2020 Nissan Altima, where to find your VIN, and how to replace it.
VinSnap does not have a verified water pump part number for the 2020 Nissan Altima yet. Which water pump fits depends on the engine code and how the pump is driven (timing belt, timing chain or accessory belt), so compare those on the part you are replacing. The 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb; it identifies the exact engine and trim.
Last updated: · Source: VinSnap
2020 Nissan Altima water pump: key facts
| Verified part number | None on file yet |
|---|---|
| Fit is decided by | The engine code and how the pump is driven (timing belt, timing chain or accessory belt) |
| NHTSA recalls: engine and engine cooling | 1 of 6 for this model |
| DIY | Advanced DIY (often done with timing belt) |
Sources: NHTSA recalls.
Water Pump: what it does & when to replace it
The water pump circulates coolant through the engine and radiator to keep temperatures in check. Failure signs include coolant leaking from the pump weep hole, a whining or grinding bearing noise, overheating, or coolant pooling at the front of the engine. On many engines the pump is driven by the timing belt, so it is commonly replaced together with the timing belt to save labor. This is an advanced DIY or shop job — access is often deep in the engine and incorrect coolant bleeding can cause overheating.
DIY difficulty: Advanced DIY (often done with timing belt). Always confirm the correct part for your exact build by VIN before buying.
2020 Nissan Altima specifications
| Specification | Value |
|---|---|
| Make | Nissan |
| Model | Altima |
| Model Year | 2020 |
| Overall Length (mm) | 4900 |
| Overall Width (mm) | 1850 |
| Overall Height (mm) | 1450 |
| Wheelbase (mm) | 2830 |
| Curb Weight (kg) | 1545 |
| Front Bumper to Windshield Base (mm) | 1340 |
| Side Glass Height (mm) | 330 |
| Side Glass Base to Rocker Panel (mm) | 820 |
| Roof Width Between Side Rails (mm) | 1090 |
| Front Overhang (mm) | 970 |
| Rear Overhang (mm) | 1120 |
| Front Track Width (mm) | 1610 |
| Rear Track Width (mm) | 1610 |
| Weight Distribution, Front/Rear (%) | 61/39 |
| Models Nissan offered in 2020 | 18 |
Source: NHTSA vPIC / Canadian Vehicle Specifications database. Linear dimensions in mm; weight in kg. Your exact build may vary by trim and options — decode your VIN to confirm the correct water pump.
How to replace the water pump on a 2020 Nissan Altima
- 1With the engine cold, drain the coolant and remove any covers, belts, or the timing belt as needed to reach the pump.
- 2Unbolt the old water pump and remove it, then clean the mating surface completely of old gasket material.
- 3Fit the new pump with a fresh gasket/seal, torquing the bolts evenly to spec.
- 4Reassemble the belt(s)/timing components, hoses, and covers.
- 5Refill and bleed the cooling system, then run the engine and verify no leaks and normal temperature.
⚠ Often driven by the timing belt — replace both together. Incorrect bleeding causes overheating.
These are general steps for the cooling category. Exact fastener locations, torque values, and the correct part number depend on your 2020 Nissan Altima’s build — confirm by VIN before you start.
Shop water pump for your 2020 Nissan Altima
Browse water pump listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact water pump by VIN
Find parts for your exact 2020 Nissan Altima by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2020 Nissan Altima — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What water pump fits a 2020 Nissan Altima?
VinSnap has no verified water pump part number for the 2020 Nissan Altima yet. Match on the engine code and how the pump is driven (timing belt, timing chain or accessory belt); the 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb, and it pins down the engine and trim.
How often should the water pump on a 2020 Nissan Altima be replaced?
The water pump circulates coolant through the engine and radiator to keep temperatures in check. Failure signs include coolant leaking from the pump weep hole, a whining or grinding bearing noise, overheating, or coolant pooling at the front of the engine. VinSnap has no manufacturer-specific interval on file for the 2020 Nissan Altima; the owner’s manual has the official schedule.
Can I replace the water pump on a 2020 Nissan Altima myself?
Advanced DIY (often done with timing belt). Allow about 3–5 hours. Tools: drain pan, socket set, torque wrench, gasket scraper, fresh coolant. Often driven by the timing belt — replace both together. Incorrect bleeding causes overheating.
Are there recalls on the 2020 Nissan Altima’s engine and engine cooling?
Yes. NHTSA lists 1 recall for the 2020 Nissan Altima filed under the engine and engine cooling: 25V437000 (2025-06-27), engine and engine cooling / engine / hard parts internal/mechanical. Recall repairs are free at a franchised Nissan dealer.