Home › Vehicles › 2020 Tesla Model S › Brake Rotors

What Brake Rotors Fit a 2020 Tesla Model S?

Brake rotors part numbers catalogued for the 2020 Tesla Model S (60 electric, 302 hp), the engine variants that change them, and how to replace them.

The 2020 Tesla Model S with the 60 electric, 302 hp engine takes brake rotors such as BREMBO 09.N265.21, FEBI BILSTEIN 178233 and ZIMMERMANN 550.5601.54 (aftermarket parts catalogue). The catalogue lists 41 brake rotors from 17 brands for this engine, ZIMMERMANN listing the most (5). The 2020 Model S was built with 40 engine variants (); these part numbers are catalogued for the 60 electric, and other engines can take a different brake rotor.

Last updated:  ·  Source: aftermarket parts catalogue

Find the exact brake rotors for your 2020 Tesla Model S by VIN → Search parts by VIN →
VIN matched parts Brakes component 18 verified vehicle specs

2020 Tesla Model S brake rotors: key facts

Catalogued engine60 electric, 302 hp
Part numbers09.N265.21 (BREMBO); 09.D773.11 (BREMBO); 178233 (FEBI BILSTEIN); 178232 (FEBI BILSTEIN); 550.5601.54 (ZIMMERMANN); 550.5601.20 (ZIMMERMANN)
Catalogue listings41 brake rotors, 17 brands
Engine variants (2020)40,
Fit is decided byThe axle, the disc diameter and thickness, and whether the disc is solid or vented
NHTSA recalls: brakesNone of 11 on record
DIYModerate DIY (replace in pairs, do with pads)

Sources: aftermarket parts catalogue (part numbers, engines), NHTSA recalls.

Brake Rotors: what it does & when to replace it

Brake rotors (discs) are the metal discs the pads clamp onto. They wear thinner over time and can warp from heat. Replacement signs include a pulsation or shudder through the brake pedal or steering wheel under braking, deep scoring or grooves you can feel, a blue tint from overheating, or rotor thickness below the manufacturer minimum stamped on the hub. Rotors are usually replaced in pairs (both sides of an axle) and most shops now replace rather than machine them. Replacing rotors is a moderate DIY job and is commonly done together with new pads.

DIY difficulty: Moderate DIY (replace in pairs, do with pads). Always confirm the correct part for your exact build by VIN before buying.

Which engine does your 2020 Tesla Model S have?

The 2020 Tesla Model S was sold with 40 engine variants, and the correct brake rotors can differ between them. This is the single thing a year/make/model dropdown cannot tell you.

EngineFuelCylindersYears
60 385 hpElectric—2014–now
70D AWD 334 hpElectric—2015–now
70D AWD 525 hpElectric—2015–now
70 388 hpElectric—2015–now
70 320 hpElectric—2015–now
P90D AWD 471 hpElectric—2015–now
P90D AWD 540 hpElectric—2015–now
90D AWD 422 hpElectric—2015–now
75 388 hpElectric—2016–now
75D AWD 525 hpElectric—2016–now
60D AWD 525 hpElectric—2014–now
60 388 hpElectric—2013–now
P100D AWD 772 hpElectric—2016–now
60D AWD 334 hpElectric—2016–now
60 320 hpElectric—2016–now
75 320 hpElectric—2016–now
100D AWD 422 hpElectric—2017–now
75D AWD 333 hpElectric—2016–now
90D AWD 525 hpElectric—2015–now
100D AWD 525 hpElectric—2017–now
P100D AWD 612 hpElectric—2016–now
P90D AWD 772 hpElectric—2015–now
60 302 hpElectric—2014–now
EV AWD 1100 hpElectric—2020–now
EV AWD 662 hpElectric—2019–now
EV AWD 785 hpElectric—2019–now
100D AWD 700 hpElectric—2017–now
75 476 hpElectric—2017–now
EV AWD 796 hpElectric—2019–now
EV AWD 573 hpElectric—2020–now
EV AWD 562 hpElectric—2019–now
90 388 hpElectric—2015–now
70 476 hpElectric—2017–now
EV AWD 815 hpElectric—2020–now
EV AWD 772 hpElectric—2019–now
EV AWD 525 hpElectric—2019–now
60 476 hpElectric—2017–now
EV AWD 443 hpElectric—2019–now
EV AWD 604 hpElectric—2019–now
P90D AWD 469 hpElectric—2015–now

Engine variants catalogued for this model (parts catalogue), filtered to those built around 2020. We hold catalogued part numbers for the base engine only — decode your VIN and we resolve your exact engine, then the exact part. Full dimensions and specifications for this vehicle are on the 2020 Tesla Model S overview.

How to replace the brake rotors on a 2020 Tesla Model S

Difficulty: Moderate Time: about 2 hours per axle Tools: Jack + axle stands, Socket set, Torque wrench, Brake cleaner
  1. 1Raise and support the vehicle, remove the wheel, then unbolt and remove the caliper and caliper bracket.
  2. 2Remove the old rotor (a retaining screw or a few taps with a mallet may be needed if it is stuck).
  3. 3Clean the new rotor with brake cleaner to remove the shipping oil, then fit it onto the hub.
  4. 4Reinstall the bracket and caliper with fresh pads, torquing all fasteners to spec.
  5. 5Refit the wheel, lower the vehicle, pump the pedal firm, and bed in the new rotors and pads gently.

⚠ Replace rotors in pairs (both sides of an axle) and always with fresh pads.

These are general steps for the brakes category. Exact fastener locations, torque values, and the correct part number depend on your 2020 Tesla Model S’s build — confirm by VIN before you start.

Compatible parts for your 2020 Tesla Model S

Real brake rotors options catalogued for this 2020 Tesla Model S (parts catalogue), shown for the base engine. Each links to live marketplace listings for that exact brand and part number.

BrandPart numberNoteShop
BREMBO 09.N265.21⇆ cross-ref Brake Disc Find this part →
BREMBO 09.D773.11⇆ cross-ref Brake Disc Find this part →
FEBI BILSTEIN 178233⇆ cross-ref Brake Disc Find this part →
FEBI BILSTEIN 178232⇆ cross-ref Brake Disc Find this part →
ZIMMERMANN 550.5601.54⇆ cross-ref Brake Disc Find this part →
ZIMMERMANN 550.5601.20⇆ cross-ref Brake Disc Find this part →

Compatible options shown for the base engine — exact fit can vary by engine and trim; confirm with your VIN before buying. Part data: aftermarket parts catalogue.

Got a part number for your 2020 Tesla Model S? Cross-reference it against every brand — free. Cross-reference a part →

Shop brake rotors for your 2020 Tesla Model S

Browse brake rotors listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.

Affiliate disclosure: VinSnap may earn a commission from qualifying purchases made through these links, at no extra cost to you.

Find the exact brake rotors by VIN

Find parts for your exact 2020 Tesla Model S by VIN. Stop buying the wrong part.

Find parts by VIN →

Decode your exact VIN

Get 100+ specs for your specific 2020 Tesla Model S — engine, trim, recalls, and a PDF. Instant decode for $1.99.

Decode my VIN →

Frequently asked questions

What brake rotors fit a 2020 Tesla Model S?

The 2020 Tesla Model S with the 60 electric, 302 hp engine takes brake rotors such as BREMBO 09.N265.21, FEBI BILSTEIN 178233 and ZIMMERMANN 550.5601.54 (aftermarket parts catalogue). The 2020 Model S was built with 40 engine variants (); these part numbers are catalogued for the 60 electric, and other engines can take a different brake rotor.

Which brands make brake rotors for the 2020 Tesla Model S?

For the 60 electric engine, the catalogue lists 41 brake rotors from 17 brands: ZIMMERMANN, MINTEX, OPTIMAL, AP, BENDIX Braking, BLUE PRINT, BRECO, BREMBO and 9 more.

How often should the brake rotors on a 2020 Tesla Model S be replaced?

Brake rotors (discs) are the metal discs the pads clamp onto. They wear thinner over time and can warp from heat. VinSnap has no manufacturer-specific interval on file for the 2020 Tesla Model S; the owner’s manual has the official schedule.

Can I replace the brake rotors on a 2020 Tesla Model S myself?

Moderate DIY (replace in pairs, do with pads). Allow about 2 hours per axle. Tools: jack + axle stands, socket set, torque wrench, brake cleaner. Replace rotors in pairs (both sides of an axle) and always with fresh pads.

More parts for the 2020 Tesla Model S

Helpful guides

Share this page