What Water Pump Fits a 2020 Toyota Camry?
Water pump part numbers catalogued for the 2020 Toyota Camry (2.0 L petrol, 4-cyl, 150 hp), the engine variants that change them, and how to replace it.
The 2020 Toyota Camry with the 2.0 L petrol, 4-cyl, 150 hp engine takes water pumps such as LUZAR LWP 1950, MILES AN21343 and EUROREPAR 1691005480 (aftermarket parts catalogue). The catalogue lists 4 water pumps from 4 brands for this engine. The 2020 Camry was built with 20 engine variants (from 2.0 L to 3.5 L); these part numbers are catalogued for the 2.0 L petrol, and other engines can take a different water pump.
Last updated: · Source: aftermarket parts catalogue
2020 Toyota Camry water pump: key facts
| Catalogued engine | 2.0 L petrol, 4-cyl, 150 hp |
|---|---|
| Part numbers | LWP 1950 (LUZAR); AN21343 (MILES); 1691005480 (EUROREPAR); 369415 (KALE OTO RADYATÖR) |
| Catalogue listings | 4 water pumps, 4 brands |
| Engine variants (2020) | 20, from 2.0 L to 3.5 L |
| Fit is decided by | The engine code and how the pump is driven (timing belt, timing chain or accessory belt) |
| NHTSA recalls: engine and engine cooling | 1 of 3 for this model |
| DIY | Advanced DIY (often done with timing belt) |
Sources: aftermarket parts catalogue (part numbers, engines), NHTSA recalls.
Water Pump: what it does & when to replace it
The water pump circulates coolant through the engine and radiator to keep temperatures in check. Failure signs include coolant leaking from the pump weep hole, a whining or grinding bearing noise, overheating, or coolant pooling at the front of the engine. On many engines the pump is driven by the timing belt, so it is commonly replaced together with the timing belt to save labor. This is an advanced DIY or shop job — access is often deep in the engine and incorrect coolant bleeding can cause overheating.
DIY difficulty: Advanced DIY (often done with timing belt). Always confirm the correct part for your exact build by VIN before buying.
Which engine does your 2020 Toyota Camry have?
The 2020 Toyota Camry was sold with 20 engine variants, and the correct water pump can differ between them. This is the single thing a year/make/model dropdown cannot tell you.
| Engine | Fuel | Cylinders | Years |
|---|---|---|---|
| 2.5 L 206 hp | Petrol | 4 | 2017–now |
| 2.5 L 218 hp | Petrol/Electric | 4 | 2017–now |
| 3.5 L 310 hp | Petrol | 6 | 2017–now |
| 2.5 L 200 hp | Petrol | 4 | 2017–now |
| 2.5 L 178 hp | Petrol | 4 | 2017–now |
| 3.5 L 298 hp | Petrol | 6 | 2017–now |
| 2.5 L 181 hp | Petrol | 4 | 2017–now |
| 2.5 L 204 hp | Petrol | 4 | 2017–now |
| 3.5 L 296 hp | Petrol | 6 | 2017–now |
| 3.5 L 305 hp | Petrol | 6 | 2018–now |
| 3.5 L 302 hp | Petrol | 6 | 2017–now |
| 2.0 L 150 hp | Petrol | 4 | 2017–now |
| 3.5 L 249 hp | Petrol | 6 | 2017–now |
| 2.5 L 184 hp | Petrol | 4 | 2017–now |
| 2.0 L 167 hp | Petrol | 4 | 2018–now |
| 2.5 L 209 hp | Petrol | 4 | 2017–now |
| 2.5 L 208 hp | Petrol/Electric | 4 | 2017–now |
| 2.5 L 209 hp | Petrol/Ethanol | 4 | 2018–now |
| 2.5 L 211 hp | Petrol/Ethanol/Electric | 4 | 2018–now |
| 2.5 L 208 hp | Petrol | 4 | 2017–now |
Engine variants catalogued for this model (parts catalogue), filtered to those built around 2020. We hold catalogued part numbers for the base engine only — decode your VIN and we resolve your exact engine, then the exact part. Full dimensions and specifications for this vehicle are on the 2020 Toyota Camry overview.
How to replace the water pump on a 2020 Toyota Camry
- 1With the engine cold, drain the coolant and remove any covers, belts, or the timing belt as needed to reach the pump.
- 2Unbolt the old water pump and remove it, then clean the mating surface completely of old gasket material.
- 3Fit the new pump with a fresh gasket/seal, torquing the bolts evenly to spec.
- 4Reassemble the belt(s)/timing components, hoses, and covers.
- 5Refill and bleed the cooling system, then run the engine and verify no leaks and normal temperature.
⚠ Often driven by the timing belt — replace both together. Incorrect bleeding causes overheating.
These are general steps for the cooling category. Exact fastener locations, torque values, and the correct part number depend on your 2020 Toyota Camry’s build — confirm by VIN before you start.
Compatible parts for your 2020 Toyota Camry
Real water pump options catalogued for this 2020 Toyota Camry (parts catalogue), shown for the base engine (2.0000 L Petrol). Each links to live marketplace listings for that exact brand and part number.
| Brand | Part number | Note | Shop |
|---|---|---|---|
| LUZAR | LWP 1950⇆ cross-ref |
Water Pump, engine cooling | Find this part → |
| MILES | AN21343⇆ cross-ref |
Water Pump, engine cooling | Find this part → |
| EUROREPAR | 1691005480⇆ cross-ref |
Water Pump, engine cooling | Find this part → |
| KALE OTO RADYATÖR | 369415⇆ cross-ref |
Water Pump, engine cooling | Find this part → |
Compatible options shown for the base engine — exact fit can vary by engine and trim; confirm with your VIN before buying. Part data: aftermarket parts catalogue.
Shop water pump for your 2020 Toyota Camry
Browse water pump listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact water pump by VIN
Find parts for your exact 2020 Toyota Camry by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2020 Toyota Camry — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What water pump fits a 2020 Toyota Camry?
The 2020 Toyota Camry with the 2.0 L petrol, 4-cyl, 150 hp engine takes water pumps such as LUZAR LWP 1950, MILES AN21343 and EUROREPAR 1691005480 (aftermarket parts catalogue). The 2020 Camry was built with 20 engine variants (from 2.0 L to 3.5 L); these part numbers are catalogued for the 2.0 L petrol, and other engines can take a different water pump.
Which brands make water pumps for the 2020 Toyota Camry?
For the 2.0 L petrol engine, the catalogue lists 4 water pumps from 4 brands: EUROREPAR, KALE OTO RADYATÖR, LUZAR and MILES.
How often should the water pump on a 2020 Toyota Camry be replaced?
The water pump circulates coolant through the engine and radiator to keep temperatures in check. Failure signs include coolant leaking from the pump weep hole, a whining or grinding bearing noise, overheating, or coolant pooling at the front of the engine. VinSnap has no manufacturer-specific interval on file for the 2020 Toyota Camry; the owner’s manual has the official schedule.
Can I replace the water pump on a 2020 Toyota Camry myself?
Advanced DIY (often done with timing belt). Allow about 3–5 hours. Tools: drain pan, socket set, torque wrench, gasket scraper, fresh coolant. Often driven by the timing belt — replace both together. Incorrect bleeding causes overheating.
Are there recalls on the 2020 Toyota Camry’s engine and engine cooling?
Yes. NHTSA lists 1 recall for the 2020 Toyota Camry filed under the engine and engine cooling: 20V064000 (2020-02-06), engine and engine cooling. Recall repairs are free at a franchised Toyota dealer.