Home › Vehicles › 2021 Dodge Charger › Water Pump

What Water Pump Fits a 2021 Dodge Charger?

Water pump part numbers catalogued for the 2021 Dodge Charger (3.6 L petrol, 6-cyl, 292 hp), the engine variants that change them, and how to replace it.

The 2021 Dodge Charger with the 3.6 L petrol, 6-cyl, 292 hp engine takes water pumps such as GATES-MX 44020, BOGAP W4234107 and LUZAR LWP 0332 (aftermarket parts catalogue). The catalogue lists 4 water pumps from 4 brands for this engine. The 2021 Charger was built with 13 engine variants (from 3.6 L to 6.4 L); these part numbers are catalogued for the 3.6 L petrol, and other engines can take a different water pump.

Last updated:  ·  Source: aftermarket parts catalogue

Find the exact water pump for your 2021 Dodge Charger by VIN → Search parts by VIN →
VIN matched parts Cooling component 18 verified vehicle specs

2021 Dodge Charger water pump: key facts

Catalogued engine3.6 L petrol, 6-cyl, 292 hp
Part numbers44020 (GATES-MX); W4234107 (BOGAP); LWP 0332 (LUZAR); P1098 (K'nadian)
Catalogue listings4 water pumps, 4 brands
Engine variants (2021)13, from 3.6 L to 6.4 L
Fit is decided byThe engine code and how the pump is driven (timing belt, timing chain or accessory belt)
NHTSA recalls: engine and engine coolingNone of 2 on record
DIYAdvanced DIY (often done with timing belt)

Sources: aftermarket parts catalogue (part numbers, engines), NHTSA recalls.

Water Pump: what it does & when to replace it

The water pump circulates coolant through the engine and radiator to keep temperatures in check. Failure signs include coolant leaking from the pump weep hole, a whining or grinding bearing noise, overheating, or coolant pooling at the front of the engine. On many engines the pump is driven by the timing belt, so it is commonly replaced together with the timing belt to save labor. This is an advanced DIY or shop job — access is often deep in the engine and incorrect coolant bleeding can cause overheating.

DIY difficulty: Advanced DIY (often done with timing belt). Always confirm the correct part for your exact build by VIN before buying.

Which engine does your 2021 Dodge Charger have?

The 2021 Dodge Charger was sold with 13 engine variants, and the correct water pump can differ between them. This is the single thing a year/make/model dropdown cannot tell you.

EngineFuelCylindersYears
3.6 L 296 hpPetrol/Ethanol62010–2023
3.6 L 296 hpPetrol62011–now
5.7 L 375 hpPetrol82010–now
6.4 L 477 hpPetrol82011–now
3.6 L 292 hpPetrol62012–now
5.7 L 370 hpPetrol82012–now
6.4 L 492 hpPetrol82014–now
6.2 L 717 hpPetrol82014–now
3.6 L 309 hpPetrol/Ethanol62017–now
6.2 L 727 hpPetrol82018–now
3.6 L 305 hpPetrol62018–now
3.6 L 305 hpPetrol/Ethanol62018–now
6.2 L 808 hpPetrol82020–now

Engine variants catalogued for this model (parts catalogue), filtered to those built around 2021. We hold catalogued part numbers for the base engine only — decode your VIN and we resolve your exact engine, then the exact part. Full dimensions and specifications for this vehicle are on the 2021 Dodge Charger overview.

How to replace the water pump on a 2021 Dodge Charger

Difficulty: Advanced Time: about 3–5 hours Tools: Drain pan, Socket set, Torque wrench, Gasket scraper, Fresh coolant
  1. 1With the engine cold, drain the coolant and remove any covers, belts, or the timing belt as needed to reach the pump.
  2. 2Unbolt the old water pump and remove it, then clean the mating surface completely of old gasket material.
  3. 3Fit the new pump with a fresh gasket/seal, torquing the bolts evenly to spec.
  4. 4Reassemble the belt(s)/timing components, hoses, and covers.
  5. 5Refill and bleed the cooling system, then run the engine and verify no leaks and normal temperature.

⚠ Often driven by the timing belt — replace both together. Incorrect bleeding causes overheating.

These are general steps for the cooling category. Exact fastener locations, torque values, and the correct part number depend on your 2021 Dodge Charger’s build — confirm by VIN before you start.

Compatible parts for your 2021 Dodge Charger

Real water pump options catalogued for this 2021 Dodge Charger (parts catalogue), shown for the base engine (3.6000 L Petrol). Each links to live marketplace listings for that exact brand and part number.

BrandPart numberNoteShop
GATES-MX 44020⇆ cross-ref Water Pump, engine cooling Find this part →
BOGAP W4234107⇆ cross-ref Water Pump, engine cooling Find this part →
LUZAR LWP 0332⇆ cross-ref Water Pump, engine cooling Find this part →
K'nadian P1098⇆ cross-ref Water Pump, engine cooling Find this part →

Compatible options shown for the base engine — exact fit can vary by engine and trim; confirm with your VIN before buying. Part data: aftermarket parts catalogue.

Got a part number for your 2021 Dodge Charger? Cross-reference it against every brand — free. Cross-reference a part →

Shop water pump for your 2021 Dodge Charger

Browse water pump listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.

Affiliate disclosure: VinSnap may earn a commission from qualifying purchases made through these links, at no extra cost to you.

Find the exact water pump by VIN

Find parts for your exact 2021 Dodge Charger by VIN. Stop buying the wrong part.

Find parts by VIN →

Decode your exact VIN

Get 100+ specs for your specific 2021 Dodge Charger — engine, trim, recalls, and a PDF. Instant decode for $1.99.

Decode my VIN →

Frequently asked questions

What water pump fits a 2021 Dodge Charger?

The 2021 Dodge Charger with the 3.6 L petrol, 6-cyl, 292 hp engine takes water pumps such as GATES-MX 44020, BOGAP W4234107 and LUZAR LWP 0332 (aftermarket parts catalogue). The 2021 Charger was built with 13 engine variants (from 3.6 L to 6.4 L); these part numbers are catalogued for the 3.6 L petrol, and other engines can take a different water pump.

Which brands make water pumps for the 2021 Dodge Charger?

For the 3.6 L petrol engine, the catalogue lists 4 water pumps from 4 brands: BOGAP, GATES-MX, K'nadian and LUZAR.

How often should the water pump on a 2021 Dodge Charger be replaced?

The water pump circulates coolant through the engine and radiator to keep temperatures in check. Failure signs include coolant leaking from the pump weep hole, a whining or grinding bearing noise, overheating, or coolant pooling at the front of the engine. VinSnap has no manufacturer-specific interval on file for the 2021 Dodge Charger; the owner’s manual has the official schedule.

Can I replace the water pump on a 2021 Dodge Charger myself?

Advanced DIY (often done with timing belt). Allow about 3–5 hours. Tools: drain pan, socket set, torque wrench, gasket scraper, fresh coolant. Often driven by the timing belt — replace both together. Incorrect bleeding causes overheating.

More parts for the 2021 Dodge Charger

Helpful guides

Share this page