What Engine Air Filter Fits a 2024 Dodge Charger?
Engine air filter part numbers catalogued for the 2024 Dodge Charger (3.6 L petrol, 6-cyl, 292 hp), the engine variants that change them, and how to replace it.
The 2024 Dodge Charger with the 3.6 L petrol, 6-cyl, 292 hp engine takes engine air filters such as K&N Filters 33-2460, DENCKERMANN A142039 and Castrol Filters CA0483 (aftermarket parts catalogue). The catalogue lists 3 air filters from 3 brands for this engine. The 2024 Charger was built with 13 engine variants (from 3.6 L to 6.4 L); these part numbers are catalogued for the 3.6 L petrol, and other engines can take a different air filter.
Last updated: · Source: aftermarket parts catalogue
2024 Dodge Charger engine air filter: key facts
| Catalogued engine | 3.6 L petrol, 6-cyl, 292 hp |
|---|---|
| Part numbers | 33-2460 (K&N Filters); A142039 (DENCKERMANN); CA0483 (Castrol Filters) |
| Catalogue listings | 3 air filters, 3 brands |
| Engine variants (2024) | 13, from 3.6 L to 6.4 L |
| Fit is decided by | The engine and the shape and dimensions of the airbox |
| NHTSA recalls: engine | None of 2 on record |
| DIY | Very easy DIY (5–10 minutes, no tools) |
Sources: aftermarket parts catalogue (part numbers, engines), NHTSA recalls.
Engine Air Filter: what it does & when to replace it
The engine air filter keeps dust, pollen, and debris out of the intake so only clean air reaches the combustion chamber. A clogged filter restricts airflow, which can reduce fuel economy and acceleration. Most are replaced every 20,000–30,000 km, sooner in dusty conditions. A quick check: hold it up to light — if little passes through, replace it. This is one of the simplest maintenance tasks; the filter usually sits in an airbox under a few clips with no tools required, making it a true beginner DIY job.
DIY difficulty: Very easy DIY (5–10 minutes, no tools). Always confirm the correct part for your exact build by VIN before buying.
Which engine does your 2024 Dodge Charger have?
The 2024 Dodge Charger was sold with 13 engine variants, and the correct engine air filter can differ between them. This is the single thing a year/make/model dropdown cannot tell you.
| Engine | Fuel | Cylinders | Years |
|---|---|---|---|
| 3.6 L 296 hp | Petrol | 6 | 2011–now |
| 5.7 L 375 hp | Petrol | 8 | 2010–now |
| 6.4 L 477 hp | Petrol | 8 | 2011–now |
| 3.6 L 292 hp | Petrol | 6 | 2012–now |
| 5.7 L 370 hp | Petrol | 8 | 2012–now |
| 3.6 L 296 hp | Petrol/Ethanol | 6 | 2011–now |
| 6.4 L 492 hp | Petrol | 8 | 2014–now |
| 6.2 L 717 hp | Petrol | 8 | 2014–now |
| 3.6 L 309 hp | Petrol/Ethanol | 6 | 2017–now |
| 6.2 L 727 hp | Petrol | 8 | 2018–now |
| 3.6 L 305 hp | Petrol | 6 | 2018–now |
| 3.6 L 305 hp | Petrol/Ethanol | 6 | 2018–now |
| 6.2 L 808 hp | Petrol | 8 | 2020–now |
Engine variants catalogued for this model (parts catalogue), filtered to those built around 2024. We hold catalogued part numbers for the base engine only — decode your VIN and we resolve your exact engine, then the exact part. Full dimensions and specifications for this vehicle are on the 2024 Dodge Charger overview.
How to replace the engine air filter on a 2024 Dodge Charger
- 1Locate the airbox — a large plastic housing connected to the intake duct.
- 2Release the clips or screws holding the airbox lid and open it.
- 3Lift out the old filter, noting its orientation (which way is up/airflow).
- 4Wipe out any debris from the housing, then seat the new filter the same way the old one sat.
- 5Close and re-secure the lid. No tools or calibration needed.
⚠ Fit the filter in the correct orientation so it seals fully.
These are general steps for the engine category. Exact fastener locations, torque values, and the correct part number depend on your 2024 Dodge Charger’s build — confirm by VIN before you start.
Compatible parts for your 2024 Dodge Charger
Real engine air filter options catalogued for this 2024 Dodge Charger (parts catalogue), shown for the base engine (3.6000 L Petrol). Each links to live marketplace listings for that exact brand and part number.
| Brand | Part number | Note | Shop |
|---|---|---|---|
| K&N Filters | 33-2460⇆ cross-ref |
Air Filter | Find this part → |
| DENCKERMANN | A142039⇆ cross-ref |
Air Filter | Find this part → |
| Castrol Filters | CA0483⇆ cross-ref |
Air Filter | Find this part → |
Compatible options shown for the base engine — exact fit can vary by engine and trim; confirm with your VIN before buying. Part data: aftermarket parts catalogue.
Shop engine air filter for your 2024 Dodge Charger
Browse engine air filter listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact engine air filter by VIN
Find parts for your exact 2024 Dodge Charger by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2024 Dodge Charger — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What engine air filter fits a 2024 Dodge Charger?
The 2024 Dodge Charger with the 3.6 L petrol, 6-cyl, 292 hp engine takes engine air filters such as K&N Filters 33-2460, DENCKERMANN A142039 and Castrol Filters CA0483 (aftermarket parts catalogue). The 2024 Charger was built with 13 engine variants (from 3.6 L to 6.4 L); these part numbers are catalogued for the 3.6 L petrol, and other engines can take a different air filter.
Which brands make engine air filters for the 2024 Dodge Charger?
For the 3.6 L petrol engine, the catalogue lists 3 air filters from 3 brands: Castrol Filters, DENCKERMANN and K&N Filters.
How often should the engine air filter on a 2024 Dodge Charger be replaced?
The engine air filter keeps dust, pollen, and debris out of the intake so only clean air reaches the combustion chamber. A clogged filter restricts airflow, which can reduce fuel economy and acceleration. VinSnap has no manufacturer-specific interval on file for the 2024 Dodge Charger; the owner’s manual has the official schedule.
Can I replace the engine air filter on a 2024 Dodge Charger myself?
Very easy DIY (5–10 minutes, no tools). Allow about 5–10 minutes. Tools: usually none, screwdriver (some airboxes). Fit the filter in the correct orientation so it seals fully.