What Oil Filter Fits a 2024 Ford Bronco?
What decides oil filter fit on the 2024 Ford Bronco, where to find your VIN, and how to replace it.
VinSnap does not have a verified oil filter part number for the 2024 Ford Bronco yet. Which oil filter fits depends on the engine, the thread size, the gasket diameter and the bypass-valve rating, so compare those on the part you are replacing. The 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb; it identifies the exact engine and trim.
Last updated: · Source: VinSnap
2024 Ford Bronco oil filter: key facts
| Verified part number | None on file yet |
|---|---|
| Fit is decided by | The engine, the thread size, the gasket diameter and the bypass-valve rating |
| NHTSA recalls: engine | 1 of 16 for this model |
| DIY | Easy DIY (with every oil change) |
Sources: NHTSA recalls.
Oil Filter: what it does & when to replace it
The oil filter removes metal particles, dirt, and combustion by-products from the engine oil so they do not circulate and cause wear. It is replaced at every oil change — typically every 8,000–16,000 km or per the maintenance schedule. A clogged filter can trigger the bypass valve, letting unfiltered oil through, which accelerates engine wear. Using the correct filter for the engine matters: thread size, gasket diameter, and bypass-valve spec vary. This is one of the easiest DIY jobs, done with the oil change using a filter wrench and a drain pan.
DIY difficulty: Easy DIY (with every oil change). Always confirm the correct part for your exact build by VIN before buying.
2024 Ford Bronco specifications
| Specification | Value |
|---|---|
| Make | Ford |
| Model | Bronco |
| Model Year | 2024 |
| Overall Length (mm) | 4190 |
| Overall Width (mm) | 2020 |
| Overall Height (mm) | 1830 |
| Wheelbase (mm) | 2550 |
| Curb Weight (kg) | 1945 |
| Front Bumper to Windshield Base (mm) | 1410 |
| Side Glass Height (mm) | 440 |
| Side Glass Base to Rocker Panel (mm) | 760 |
| Roof Width Between Side Rails (mm) | 1420 |
| Front Overhang (mm) | 810 |
| Rear Overhang (mm) | 830 |
| Front Track Width (mm) | 1700 |
| Rear Track Width (mm) | 1700 |
| Weight Distribution, Front/Rear (%) | 54/46 |
| Models Ford offered in 2024 | 46 |
Source: NHTSA vPIC / Canadian Vehicle Specifications database. Linear dimensions in mm; weight in kg. Your exact build may vary by trim and options — decode your VIN to confirm the correct oil filter.
How to replace the oil filter on a 2024 Ford Bronco
- 1Warm the engine briefly, then raise and support the vehicle and place a drain pan under the sump.
- 2Remove the drain plug to drain the old oil, then locate and unscrew the old oil filter (oil will spill — keep the pan under it).
- 3Wipe the sealing surface clean and smear a little fresh oil on the new filter’s rubber gasket.
- 4Spin the new filter on hand-tight (about three-quarters of a turn past first contact — do not overtighten), and refit the drain plug.
- 5Refill with the correct grade and quantity of oil, run the engine, and check for leaks and the correct level.
⚠ Use the exact filter and oil spec for your engine — thread size and bypass valve vary.
These are general steps for the engine category. Exact fastener locations, torque values, and the correct part number depend on your 2024 Ford Bronco’s build — confirm by VIN before you start.
Shop oil filter for your 2024 Ford Bronco
Browse oil filter listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact oil filter by VIN
Find parts for your exact 2024 Ford Bronco by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2024 Ford Bronco — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What oil filter fits a 2024 Ford Bronco?
VinSnap has no verified oil filter part number for the 2024 Ford Bronco yet. Match on the engine, the thread size, the gasket diameter and the bypass-valve rating; the 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb, and it pins down the engine and trim.
How often should the oil filter on a 2024 Ford Bronco be replaced?
The oil filter removes metal particles, dirt, and combustion by-products from the engine oil so they do not circulate and cause wear. It is replaced at every oil change — typically every 8,000–16,000 km or per the maintenance schedule. VinSnap has no manufacturer-specific interval on file for the 2024 Ford Bronco; the owner’s manual has the official schedule.
Can I replace the oil filter on a 2024 Ford Bronco myself?
Easy DIY (with every oil change). Allow about 30 minutes with an oil change. Tools: oil filter wrench, drain pan, new oil, funnel, gloves. Use the exact filter and oil spec for your engine — thread size and bypass valve vary.
Are there recalls on the 2024 Ford Bronco’s engine?
Yes. NHTSA lists 1 recall for the 2024 Ford Bronco filed under the engine: 26V468000 (2026-07-20), engine. Recall repairs are free at a franchised Ford dealer.