What Water Pump Fit a 2016 Chevrolet Silverado?
Water Pump fitment for the 2016 Chevrolet Silverado — real NHTSA specs, replacement guidance, and how to find the exact guaranteed-fit part by VIN.
The correct water pump for a 2016 Chevrolet Silverado is determined by its exact factory build, not just the year, make, and model. This 2016 Chevrolet Silverado is 5980 mm long with a 3890 mm wheelbase and weighs 2341 kg (NHTSA data), figures that influence which cooling components were fitted from the factory. To get the exact guaranteed-fit water pump, decode your 17-character VIN — it pins down the trim, engine, and options the year/make/model alone can't.
Last updated: · Source: NHTSA vPIC
Water Pump: what it does & when to replace it
The water pump circulates coolant through the engine and radiator to keep temperatures in check. Failure signs include coolant leaking from the pump weep hole, a whining or grinding bearing noise, overheating, or coolant pooling at the front of the engine. On many engines the pump is driven by the timing belt, so it is commonly replaced together with the timing belt to save labor. This is an advanced DIY or shop job — access is often deep in the engine and incorrect coolant bleeding can cause overheating.
DIY difficulty: Advanced DIY (often done with timing belt). Always confirm the correct part for your exact build by VIN before buying.
2016 Chevrolet Silverado specifications
| Specification | Value |
|---|---|
| Make | Chevrolet |
| Model | Silverado |
| Model Year | 2016 |
| Overall Length (mm) | 5980 |
| Overall Width (mm) | 2030 |
| Overall Height (mm) | 1870 |
| Wheelbase (mm) | 3890 |
| Curb Weight (kg) | 2341 |
| Front Track (mm) | 1360 |
| Rear Track (mm) | 3280 |
| Front Overhang (mm) | 440 |
| Rear Overhang (mm) | 890 |
| Wheelbase Detail (mm) | 1290 |
| Track Width (mm) | 1000 |
| Ground Clearance (mm) | 1080 |
| Models Chevrolet offered in 2016 | 35 |
Source: NHTSA vPIC / Canadian Vehicle Specifications database. Linear dimensions in mm; weight in kg. Your exact build may vary by trim and options — decode your VIN to confirm the correct water pump.
How to replace the water pump on a 2016 Chevrolet Silverado
- 1With the engine cold, drain the coolant and remove any covers, belts, or the timing belt as needed to reach the pump.
- 2Unbolt the old water pump and remove it, then clean the mating surface completely of old gasket material.
- 3Fit the new pump with a fresh gasket/seal, torquing the bolts evenly to spec.
- 4Reassemble the belt(s)/timing components, hoses, and covers.
- 5Refill and bleed the cooling system, then run the engine and verify no leaks and normal temperature.
⚠ Often driven by the timing belt — replace both together. Incorrect bleeding causes overheating.
These are general steps for the cooling category. Exact fastener locations, torque values, and the correct part number depend on your 2016 Chevrolet Silverado’s build — confirm by VIN before you start.
Compatible parts for your 2016 Chevrolet Silverado
Real water pump options catalogued for this 2016 Chevrolet Silverado (TecDoc), shown for the base engine (6.0000 L Petrol). Each links to live marketplace listings for that exact brand and part number.
| Brand | Part number | Note | Shop |
|---|---|---|---|
| BLUE PRINT | ADBP910013⇆ cross-ref |
Auxiliary Water Pump (cooling water circuit) | Find this part → |
| FEBI BILSTEIN | 178884⇆ cross-ref |
Auxiliary Water Pump (cooling water circuit) | Find this part → |
| GATES | WP0240⇆ cross-ref |
Water Pump, engine cooling | Find this part → |
| GMB | GWG-106AT⇆ cross-ref |
Water Pump, engine cooling | Find this part → |
| GMB Oceania | GWG-106AT⇆ cross-ref |
Water Pump, engine cooling | Find this part → |
| SWAG | 33 10 4727⇆ cross-ref |
Auxiliary Water Pump (cooling water circuit) | Find this part → |
Compatible options shown for the base engine — exact fit can vary by engine and trim; confirm with your VIN before buying. Part data: TecDoc catalogue.
Shop water pump for your 2016 Chevrolet Silverado
Browse water pump listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact water pump by VIN
Search 1.2M+ parts filtered to your exact 2016 Chevrolet Silverado by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2016 Chevrolet Silverado — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What water pump fit a 2016 Chevrolet Silverado?
The right water pump for a 2016 Chevrolet Silverado depends on its exact factory configuration — trim, engine, and options — which year, make, and model alone don't capture. Its 5980 mm length and 3890 mm wheelbase (from NHTSA data) is part of why fitment varies. Enter your VIN on VinSnap to get parts matched at 99.8% fitment accuracy against a 1.2M+ catalog, instead of guessing from a dropdown.
How often should the water pump on a 2016 Chevrolet Silverado be replaced?
The water pump circulates coolant through the engine and radiator to keep temperatures in check. Failure signs include coolant leaking from the pump weep hole, a whining or grinding bearing noise, overheating, or coolant pooling at the front of the engine. For your specific 2016 Chevrolet Silverado, follow the maintenance schedule and confirm the correct part by VIN before buying.
Can I replace the water pump on a 2016 Chevrolet Silverado myself?
Advanced DIY (often done with timing belt). Difficulty and the exact part number still depend on your 2016 Chevrolet Silverado's build, so decode your VIN on VinSnap to confirm the correct water pump and avoid buying the wrong one.