What Headlight Bulbs Fit a 2016 Tesla Model S?
What decides headlight bulb fit on the 2016 Tesla Model S, where to find your VIN, and how to replace them.
VinSnap does not have a verified headlight bulb part number for the 2016 Tesla Model S yet. Which headlight bulbs fit depends on the bulb fitment code (for example H11 or 9005) and whether the headlight housing is halogen, HID or LED, so compare those on the part you are replacing. The 2016 Model S was built with 33 engine variants (), so the right headlight bulb depends on which one yours has. The 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb; it identifies the exact engine and trim.
Last updated: · Source: aftermarket parts catalogue (engines)
2016 Tesla Model S headlight bulbs: key facts
| Verified part number | None on file yet |
|---|---|
| Engine variants (2016) | 33, |
| Fit is decided by | The bulb fitment code (for example H11 or 9005) and whether the headlight housing is halogen, HID or LED |
| NHTSA recalls: lighting | None of 10 on record |
| DIY | Easy DIY (match the bulb fitment code) |
Sources: aftermarket parts catalogue (engines), NHTSA recalls.
Headlight Bulbs: what it does & when to replace it
Headlight bulbs light the road ahead; a burnt-out bulb is both a safety hazard and a common cause of a failed inspection. Bulb type varies (halogen, HID/xenon, or LED) and must match the housing — the fitment code (e.g. H11, 9005) is vehicle-specific. Signs include one side dimmer or out, or flickering. Many halogen bulbs swap from behind the headlight in minutes, though tight engine bays can make access awkward. Avoid touching the glass of halogen bulbs with bare fingers, as skin oil shortens their life.
DIY difficulty: Easy DIY (match the bulb fitment code). Always confirm the correct part for your exact build by VIN before buying.
Which engine does your 2016 Tesla Model S have?
The 2016 Tesla Model S was sold with 33 engine variants, and the correct headlight bulbs can differ between them. This is the single thing a year/make/model dropdown cannot tell you.
| Engine | Fuel | Cylinders | Years |
|---|---|---|---|
| 85 367 hp | Electric | — | 2012–2016 |
| 85D AWD 376 hp | Electric | — | 2014–2016 |
| P85D AWD 700 hp | Electric | — | 2014–2016 |
| 60 385 hp | Electric | — | 2014–now |
| 85 385 hp | Electric | — | 2015–2016 |
| 70D AWD 334 hp | Electric | — | 2015–now |
| 85D AWD 421 hp | Electric | — | 2014–2016 |
| P85D AWD 772 hp | Electric | — | 2015–2016 |
| 70D AWD 525 hp | Electric | — | 2015–now |
| 85D AWD 525 hp | Electric | — | 2014–2016 |
| 85 388 hp | Electric | — | 2012–2016 |
| 70 388 hp | Electric | — | 2015–now |
| 70 320 hp | Electric | — | 2015–now |
| P90D AWD 471 hp | Electric | — | 2015–now |
| P90D AWD 540 hp | Electric | — | 2015–now |
| 90D AWD 422 hp | Electric | — | 2015–now |
| 75 388 hp | Electric | — | 2016–now |
| 75D AWD 525 hp | Electric | — | 2016–now |
| 60D AWD 525 hp | Electric | — | 2014–now |
| 60 388 hp | Electric | — | 2013–now |
| P100D AWD 772 hp | Electric | — | 2016–now |
| 60D AWD 334 hp | Electric | — | 2016–now |
| 60 320 hp | Electric | — | 2016–now |
| 75 320 hp | Electric | — | 2016–now |
| 75D AWD 333 hp | Electric | — | 2016–now |
| 90D AWD 525 hp | Electric | — | 2015–now |
| 85D AWD 379 hp | Electric | — | 2014–2016 |
| P100D AWD 612 hp | Electric | — | 2016–now |
| P90D AWD 772 hp | Electric | — | 2015–now |
| 60 302 hp | Electric | — | 2014–now |
| 90 388 hp | Electric | — | 2015–now |
| 90 367 hp | Electric | — | 2012–2016 |
| P90D AWD 469 hp | Electric | — | 2015–now |
Engine variants catalogued for this model (parts catalogue), filtered to those built around 2016. We hold catalogued part numbers for the base engine only — decode your VIN and we resolve your exact engine, then the exact part. Full dimensions and specifications for this vehicle are on the 2016 Tesla Model S overview.
How to replace the headlight bulbs on a 2016 Tesla Model S
- 1Open the hood and locate the back of the headlight housing.
- 2Disconnect the bulb’s electrical connector and release the retaining clip or twist-lock.
- 3Remove the old bulb without touching the glass of a halogen bulb with bare fingers.
- 4Fit the correct new bulb by its base only, secure the clip/lock, and reconnect the connector.
- 5Test the light before closing up; aim if needed.
⚠ Use the exact fitment code (e.g. H11, 9005) for your vehicle. Skin oil shortens halogen bulb life.
These are general steps for the lighting category. Exact fastener locations, torque values, and the correct part number depend on your 2016 Tesla Model S’s build — confirm by VIN before you start.
Shop headlight bulbs for your 2016 Tesla Model S
Browse headlight bulbs listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact headlight bulbs by VIN
Find parts for your exact 2016 Tesla Model S by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2016 Tesla Model S — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What headlight bulbs fit a 2016 Tesla Model S?
VinSnap has no verified headlight bulb part number for the 2016 Tesla Model S yet. Match on the bulb fitment code (for example H11 or 9005) and whether the headlight housing is halogen, HID or LED; the 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb, and it pins down the engine and trim.
How often should the headlight bulbs on a 2016 Tesla Model S be replaced?
Headlight bulbs light the road ahead; a burnt-out bulb is both a safety hazard and a common cause of a failed inspection. Bulb type varies (halogen, HID/xenon, or LED) and must match the housing — the fitment code (e.g. VinSnap has no manufacturer-specific interval on file for the 2016 Tesla Model S; the owner’s manual has the official schedule.
Can I replace the headlight bulbs on a 2016 Tesla Model S myself?
Easy DIY (match the bulb fitment code). Allow about 10–20 minutes. Tools: gloves, screwdriver (some housings). Use the exact fitment code (e.g. H11, 9005) for your vehicle. Skin oil shortens halogen bulb life.