What Radiator Fit a 2018 Honda Accord?
Radiator fitment for the 2018 Honda Accord — real NHTSA specs, replacement guidance, and how to find the exact guaranteed-fit part by VIN.
The correct radiator for a 2018 Honda Accord is determined by its exact factory build, not just the year, make, and model. This 2018 Honda Accord is 4830 mm long with a 2720 mm wheelbase and weighs 1480 kg (NHTSA data), figures that influence which cooling components were fitted from the factory. To get the exact guaranteed-fit radiator, decode your 17-character VIN — it pins down the trim, engine, and options the year/make/model alone can't.
Last updated: · Source: NHTSA vPIC
Radiator: what it does & when to replace it
The radiator dissipates engine heat by cooling the circulating coolant. Failure signs include overheating, visible coolant leaks (often green, orange, or pink) under the car, low coolant level, or sludge in the cooling system. Plastic end-tanks can crack with age and the core can clog or corrode internally. Replacement is a moderate DIY job involving draining coolant, removing hoses and the fan/shroud, and properly refilling and bleeding air from the system. Always dispose of coolant responsibly, as it is toxic to people and animals.
DIY difficulty: Moderate DIY (drain + bleed coolant correctly). Always confirm the correct part for your exact build by VIN before buying.
2018 Honda Accord specifications
| Specification | Value |
|---|---|
| Make | Honda |
| Model | Accord |
| Model Year | 2018 |
| Overall Length (mm) | 4830 |
| Overall Width (mm) | 1850 |
| Overall Height (mm) | 1440 |
| Wheelbase (mm) | 2720 |
| Curb Weight (kg) | 1480 |
| Front Track (mm) | 1320 |
| Rear Track (mm) | 620 |
| Front Overhang (mm) | 330 |
| Rear Overhang (mm) | 810 |
| Wheelbase Detail (mm) | 1100 |
| Track Width (mm) | 1000 |
| Ground Clearance (mm) | 1100 |
| Models Honda offered in 2018 | 92 |
Source: NHTSA vPIC / Canadian Vehicle Specifications database. Linear dimensions in mm; weight in kg. Your exact build may vary by trim and options — decode your VIN to confirm the correct radiator.
How to replace the radiator on a 2018 Honda Accord
- 1With the engine cold, drain the coolant into a pan via the radiator drain or lower hose.
- 2Remove the fan/shroud, upper and lower hoses, and any transmission cooler lines or sensors attached to the radiator.
- 3Unbolt and lift out the old radiator, then set the new one into the mounts.
- 4Reconnect hoses, lines, and the fan/shroud, tightening clamps securely.
- 5Refill with the correct coolant mix and bleed all air from the system, then run the engine and recheck the level.
⚠ Never open a hot cooling system. Coolant is toxic — collect and dispose of it responsibly.
These are general steps for the cooling category. Exact fastener locations, torque values, and the correct part number depend on your 2018 Honda Accord’s build — confirm by VIN before you start.
Compatible parts for your 2018 Honda Accord
Real radiator options catalogued for this 2018 Honda Accord (TecDoc), shown for the base engine (2.4000 L Petrol). Each links to live marketplace listings for that exact brand and part number.
| Brand | Part number | Note | Shop |
|---|---|---|---|
| FEBEST | 23400-007⇆ cross-ref |
Seal, coolant pipe | Find this part → |
Compatible options shown for the base engine — exact fit can vary by engine and trim; confirm with your VIN before buying. Part data: TecDoc catalogue.
Shop radiator for your 2018 Honda Accord
Browse radiator listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact radiator by VIN
Search 1.2M+ parts filtered to your exact 2018 Honda Accord by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2018 Honda Accord — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What radiator fit a 2018 Honda Accord?
The right radiator for a 2018 Honda Accord depends on its exact factory configuration — trim, engine, and options — which year, make, and model alone don't capture. Its 4830 mm length and 2720 mm wheelbase (from NHTSA data) is part of why fitment varies. Enter your VIN on VinSnap to get parts matched at 99.8% fitment accuracy against a 1.2M+ catalog, instead of guessing from a dropdown.
How often should the radiator on a 2018 Honda Accord be replaced?
The radiator dissipates engine heat by cooling the circulating coolant. Failure signs include overheating, visible coolant leaks (often green, orange, or pink) under the car, low coolant level, or sludge in the cooling system. For your specific 2018 Honda Accord, follow the maintenance schedule and confirm the correct part by VIN before buying.
Can I replace the radiator on a 2018 Honda Accord myself?
Moderate DIY (drain + bleed coolant correctly). Difficulty and the exact part number still depend on your 2018 Honda Accord's build, so decode your VIN on VinSnap to confirm the correct radiator and avoid buying the wrong one.