What Serpentine Belt Fits a 2019 Hyundai Elantra?
What decides serpentine belt fit on the 2019 Hyundai Elantra, where to find your VIN, and how to replace it.
VinSnap does not have a verified serpentine belt part number for the 2019 Hyundai Elantra yet. Which serpentine belt fits depends on the engine and its accessories (A/C, power steering), which set the rib count and the belt length, so compare those on the part you are replacing. The 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb; it identifies the exact engine and trim.
Last updated: · Source: VinSnap
2019 Hyundai Elantra serpentine belt: key facts
| Verified part number | None on file yet |
|---|---|
| Fit is decided by | The engine and its accessories (A/C, power steering), which set the rib count and the belt length |
| NHTSA recalls: engine | 1 of 1 for this model |
| DIY | Moderate DIY (note the belt routing first) |
Sources: NHTSA recalls.
Serpentine Belt: what it does & when to replace it
The serpentine belt is a single belt that drives accessories like the alternator, water pump, power-steering pump, and A/C compressor. A worn belt causes squealing (especially on cold starts), and a snapped belt can cause overheating and loss of charging and power steering at once. Inspect for cracks, glazing, or fraying; most belts last 80,000–160,000 km. Replacement is a moderate DIY job — the trickiest part is releasing the spring-loaded tensioner and routing the belt correctly, so photograph the routing diagram first.
DIY difficulty: Moderate DIY (note the belt routing first). Always confirm the correct part for your exact build by VIN before buying.
2019 Hyundai Elantra specifications
| Specification | Value |
|---|---|
| Make | Hyundai |
| Model | Elantra |
| Model Year | 2019 |
| Overall Length (mm) | 4620 |
| Overall Width (mm) | 1800 |
| Overall Height (mm) | 1440 |
| Wheelbase (mm) | 2700 |
| Curb Weight (kg) | 1280 |
| Front Bumper to Windshield Base (mm) | 1190 |
| Side Glass Height (mm) | 320 |
| Side Glass Base to Rocker Panel (mm) | 810 |
| Roof Width Between Side Rails (mm) | 1100 |
| Front Overhang (mm) | 920 |
| Rear Overhang (mm) | 1010 |
| Front Track Width (mm) | 1560 |
| Rear Track Width (mm) | 1550 |
| Weight Distribution, Front/Rear (%) | 61/39 |
| Models Hyundai offered in 2019 | 14 |
Source: NHTSA vPIC / Canadian Vehicle Specifications database. Linear dimensions in mm; weight in kg. Your exact build may vary by trim and options — decode your VIN to confirm the correct serpentine belt.
How to replace the serpentine belt on a 2019 Hyundai Elantra
- 1Photograph or note the belt routing diagram (often on a decal under the hood) before you start.
- 2Fit the tensioner tool and rotate the spring-loaded tensioner to release belt tension.
- 3Slip the old belt off the pulleys and let the tensioner back gently.
- 4Route the new belt exactly per the diagram, keeping it centered on each pulley.
- 5Release the tensioner onto the new belt, double-check the routing and seating, then start the engine to confirm quiet running.
⚠ Correct routing is essential — a mis-routed belt can fail quickly.
These are general steps for the engine category. Exact fastener locations, torque values, and the correct part number depend on your 2019 Hyundai Elantra’s build — confirm by VIN before you start.
Shop serpentine belt for your 2019 Hyundai Elantra
Browse serpentine belt listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact serpentine belt by VIN
Search 1.2M+ parts filtered to your exact 2019 Hyundai Elantra by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2019 Hyundai Elantra — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What serpentine belt fits a 2019 Hyundai Elantra?
VinSnap has no verified serpentine belt part number for the 2019 Hyundai Elantra yet. Match on the engine and its accessories (A/C, power steering), which set the rib count and the belt length; the 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb, and it pins down the engine and trim.
How often should the serpentine belt on a 2019 Hyundai Elantra be replaced?
The serpentine belt is a single belt that drives accessories like the alternator, water pump, power-steering pump, and A/C compressor. A worn belt causes squealing (especially on cold starts), and a snapped belt can cause overheating and loss of charging and power steering at once. VinSnap has no manufacturer-specific interval on file for the 2019 Hyundai Elantra; the owner’s manual has the official schedule.
Can I replace the serpentine belt on a 2019 Hyundai Elantra myself?
Moderate DIY (note the belt routing first). Allow about 30–60 minutes. Tools: serpentine belt / tensioner tool, socket set. Correct routing is essential — a mis-routed belt can fail quickly.
Are there recalls on the 2019 Hyundai Elantra’s engine?
Yes. NHTSA lists 1 recall for the 2019 Hyundai Elantra filed under the engine: 21V301000 (2021-04-28), engine. Recall repairs are free at a franchised Hyundai dealer.