What Spark Plugs Fit a 2020 Ford Ranger?
Spark Plugs fitment for the 2020 Ford Ranger — real NHTSA specs, replacement guidance, and how to find the exact guaranteed-fit part by VIN.
The correct spark plugs for a 2020 Ford Ranger is determined by its exact factory build, not just the year, make, and model. This 2020 Ford Ranger is 5360 mm long with a 3220 mm wheelbase and weighs 1974 kg (NHTSA data), figures that influence which ignition components were fitted from the factory. To get the exact guaranteed-fit spark plugs, decode your 17-character VIN — it pins down the trim, engine, and options the year/make/model alone can't.
Last updated: · Source: NHTSA vPIC
Spark Plugs: what it does & when to replace it
Spark plugs ignite the air-fuel mixture in each cylinder. Worn plugs cause rough idle, misfires, hard starting, hesitation, and reduced fuel economy. Service intervals vary widely by plug type: copper plugs last around 50,000 km, while iridium and platinum plugs can last 100,000–160,000 km. Always match the manufacturer heat range and gap. Replacement is a moderate DIY job — straightforward on inline engines but harder on V-engines where the rear bank is hard to reach. Electric vehicles do not use spark plugs at all.
DIY difficulty: Moderate DIY (gap matters; harder on V-engines). Always confirm the correct part for your exact build by VIN before buying.
2020 Ford Ranger specifications
| Specification | Value |
|---|---|
| Make | Ford |
| Model | Ranger |
| Model Year | 2020 |
| Overall Length (mm) | 5360 |
| Overall Width (mm) | 1860 |
| Overall Height (mm) | 1810 |
| Wheelbase (mm) | 3220 |
| Curb Weight (kg) | 1974 |
| Front Track (mm) | 1290 |
| Rear Track (mm) | 2770 |
| Front Overhang (mm) | 400 |
| Rear Overhang (mm) | 870 |
| Wheelbase Detail (mm) | 1170 |
| Track Width (mm) | 930 |
| Ground Clearance (mm) | 1230 |
| Models Ford offered in 2020 | 43 |
Source: NHTSA vPIC / Canadian Vehicle Specifications database. Linear dimensions in mm; weight in kg. Your exact build may vary by trim and options — decode your VIN to confirm the correct spark plugs.
How to replace the spark plugs on a 2020 Ford Ranger
- 1With the engine cool, remove the engine cover and disconnect one coil pack or plug lead at a time (do them one at a time to keep firing order).
- 2Blow out debris from the plug well, then unscrew the old plug with a spark plug socket.
- 3Check the new plug’s gap against the manufacturer spec and adjust only if needed.
- 4Thread the new plug in by hand to avoid cross-threading, then torque it to spec.
- 5Reconnect the coil/lead (a dab of dielectric grease helps) and repeat for each cylinder.
⚠ Match the exact plug and heat range for your engine; V-engines’ rear bank can be hard to reach.
These are general steps for the ignition category. Exact fastener locations, torque values, and the correct part number depend on your 2020 Ford Ranger’s build — confirm by VIN before you start.
Shop spark plugs for your 2020 Ford Ranger
Browse spark plugs listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact spark plugs by VIN
Search 1.2M+ parts filtered to your exact 2020 Ford Ranger by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2020 Ford Ranger — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What spark plugs fit a 2020 Ford Ranger?
The right spark plugs for a 2020 Ford Ranger depends on its exact factory configuration — trim, engine, and options — which year, make, and model alone don't capture. Its 5360 mm length and 3220 mm wheelbase (from NHTSA data) is part of why fitment varies. Enter your VIN on VinSnap to get parts matched at 99.8% fitment accuracy against a 1.2M+ catalog, instead of guessing from a dropdown.
How often should the spark plugs on a 2020 Ford Ranger be replaced?
Spark plugs ignite the air-fuel mixture in each cylinder. Worn plugs cause rough idle, misfires, hard starting, hesitation, and reduced fuel economy. For your specific 2020 Ford Ranger, follow the maintenance schedule and confirm the correct part by VIN before buying.
Can I replace the spark plugs on a 2020 Ford Ranger myself?
Moderate DIY (gap matters; harder on V-engines). Difficulty and the exact part number still depend on your 2020 Ford Ranger's build, so decode your VIN on VinSnap to confirm the correct spark plugs and avoid buying the wrong one.