Home › Vehicles › 2019 Hyundai Elantra › Water Pump

What Water Pump Fits a 2019 Hyundai Elantra?

What decides water pump fit on the 2019 Hyundai Elantra, where to find your VIN, and how to replace it.

VinSnap does not have a verified water pump part number for the 2019 Hyundai Elantra yet. Which water pump fits depends on the engine code and how the pump is driven (timing belt, timing chain or accessory belt), so compare those on the part you are replacing. The 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb; it identifies the exact engine and trim.

Last updated:  ·  Source: VinSnap

Find the exact water pump for your 2019 Hyundai Elantra by VIN → Search parts by VIN →
99.8% fitment accuracy 1.2M+ parts catalog Cooling component 18 verified vehicle specs

2019 Hyundai Elantra water pump: key facts

Verified part numberNone on file yet
Fit is decided byThe engine code and how the pump is driven (timing belt, timing chain or accessory belt)
NHTSA recalls: engine and engine cooling1 of 1 for this model
DIYAdvanced DIY (often done with timing belt)

Sources: NHTSA recalls.

Water Pump: what it does & when to replace it

The water pump circulates coolant through the engine and radiator to keep temperatures in check. Failure signs include coolant leaking from the pump weep hole, a whining or grinding bearing noise, overheating, or coolant pooling at the front of the engine. On many engines the pump is driven by the timing belt, so it is commonly replaced together with the timing belt to save labor. This is an advanced DIY or shop job — access is often deep in the engine and incorrect coolant bleeding can cause overheating.

DIY difficulty: Advanced DIY (often done with timing belt). Always confirm the correct part for your exact build by VIN before buying.

2019 Hyundai Elantra specifications

SpecificationValue
MakeHyundai
ModelElantra
Model Year2019
Overall Length (mm)4620
Overall Width (mm)1800
Overall Height (mm)1440
Wheelbase (mm)2700
Curb Weight (kg)1280
Front Bumper to Windshield Base (mm)1190
Side Glass Height (mm)320
Side Glass Base to Rocker Panel (mm)810
Roof Width Between Side Rails (mm)1100
Front Overhang (mm)920
Rear Overhang (mm)1010
Front Track Width (mm)1560
Rear Track Width (mm)1550
Weight Distribution, Front/Rear (%)61/39
Models Hyundai offered in 201914

Source: NHTSA vPIC / Canadian Vehicle Specifications database. Linear dimensions in mm; weight in kg. Your exact build may vary by trim and options — decode your VIN to confirm the correct water pump.

How to replace the water pump on a 2019 Hyundai Elantra

Difficulty: Advanced Time: about 3–5 hours Tools: Drain pan, Socket set, Torque wrench, Gasket scraper, Fresh coolant
  1. 1With the engine cold, drain the coolant and remove any covers, belts, or the timing belt as needed to reach the pump.
  2. 2Unbolt the old water pump and remove it, then clean the mating surface completely of old gasket material.
  3. 3Fit the new pump with a fresh gasket/seal, torquing the bolts evenly to spec.
  4. 4Reassemble the belt(s)/timing components, hoses, and covers.
  5. 5Refill and bleed the cooling system, then run the engine and verify no leaks and normal temperature.

⚠ Often driven by the timing belt — replace both together. Incorrect bleeding causes overheating.

These are general steps for the cooling category. Exact fastener locations, torque values, and the correct part number depend on your 2019 Hyundai Elantra’s build — confirm by VIN before you start.

Got a part number for your 2019 Hyundai Elantra? Cross-reference it against every brand — free. Cross-reference a part →

Shop water pump for your 2019 Hyundai Elantra

Browse water pump listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.

Affiliate disclosure: VinSnap may earn a commission from qualifying purchases made through these links, at no extra cost to you.

Find the exact water pump by VIN

Search 1.2M+ parts filtered to your exact 2019 Hyundai Elantra by VIN. Stop buying the wrong part.

Find parts by VIN →

Decode your exact VIN

Get 100+ specs for your specific 2019 Hyundai Elantra — engine, trim, recalls, and a PDF. Instant decode for $1.99.

Decode my VIN →

Frequently asked questions

What water pump fits a 2019 Hyundai Elantra?

VinSnap has no verified water pump part number for the 2019 Hyundai Elantra yet. Match on the engine code and how the pump is driven (timing belt, timing chain or accessory belt); the 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb, and it pins down the engine and trim.

How often should the water pump on a 2019 Hyundai Elantra be replaced?

The water pump circulates coolant through the engine and radiator to keep temperatures in check. Failure signs include coolant leaking from the pump weep hole, a whining or grinding bearing noise, overheating, or coolant pooling at the front of the engine. VinSnap has no manufacturer-specific interval on file for the 2019 Hyundai Elantra; the owner’s manual has the official schedule.

Can I replace the water pump on a 2019 Hyundai Elantra myself?

Advanced DIY (often done with timing belt). Allow about 3–5 hours. Tools: drain pan, socket set, torque wrench, gasket scraper, fresh coolant. Often driven by the timing belt — replace both together. Incorrect bleeding causes overheating.

Are there recalls on the 2019 Hyundai Elantra’s engine and engine cooling?

Yes. NHTSA lists 1 recall for the 2019 Hyundai Elantra filed under the engine and engine cooling: 21V301000 (2021-04-28), engine. Recall repairs are free at a franchised Hyundai dealer.

More parts for the 2019 Hyundai Elantra

Helpful guides

Share this page