What Brake Pads Fit a 2020 Jeep Grand Cherokee?
What decides brake pad fit on the 2020 Jeep Grand Cherokee, where to find your VIN, and how to replace them.
VinSnap does not have a verified brake pad part number for the 2020 Jeep Grand Cherokee yet. Which brake pads fit depends on the axle (front or rear), the brake caliper make and the pad shape and thickness, so compare those on the part you are replacing. The 2020 Grand Cherokee was built with 27 engine variants (from 3.0 L to 6.4 L), so the right brake pad set depends on which one yours has. The 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb; it identifies the exact engine and trim.
Last updated: · Source: TecDoc catalogue (engines)
2020 Jeep Grand Cherokee brake pads: key facts
| Verified part number | None on file yet |
|---|---|
| Engine variants (2020) | 27, from 3.0 L to 6.4 L |
| Fit is decided by | The axle (front or rear), the brake caliper make and the pad shape and thickness |
| NHTSA recalls: brakes | None of 3 on record |
| DIY | Moderate DIY (1–2 hours per axle, basic hand tools) |
Sources: TecDoc catalogue (engines), NHTSA recalls.
Brake Pads: what it does & when to replace it
Brake pads are the friction material that presses against the rotor to slow the wheel. They are a wear item — most last 40,000–70,000 km depending on driving style and pad compound. Replacement signs include a high-pitched squeal from the wear indicator, a grinding noise (metal-on-metal, meaning the pad is gone), longer stopping distances, or a brake-warning light. Front pads wear faster than rear because the front brakes do most of the work. A competent DIY mechanic can replace pads in about an hour per axle; have a shop do it if you are unsure, since brakes are safety-critical.
DIY difficulty: Moderate DIY (1–2 hours per axle, basic hand tools). Always confirm the correct part for your exact build by VIN before buying.
Which engine does your 2020 Jeep Grand Cherokee have?
The 2020 Jeep Grand Cherokee was sold with 27 engine variants, and the correct brake pads can differ between them. This is the single thing a year/make/model dropdown cannot tell you.
| Engine | Fuel | Cylinders | Years |
|---|---|---|---|
| 3.6 L 286 hp | Petrol | 6 | 2010–now |
| 5.7 L 352 hp | Petrol | 8 | 2010–now |
| 3.0 L 190 hp | Diesel | 6 | 2011–now |
| 3.0 L 241 hp | Diesel | 6 | 2011–now |
| 6.4 L 468 hp | Petrol | 8 | 2011–now |
| 3.6 L 286 hp | Petrol/Ethanol | 6 | 2010–now |
| 3.6 L 294 hp | Petrol/Ethanol | 6 | 2010–now |
| 5.7 L 366 hp | Petrol | 8 | 2011–now |
| 3.6 L 284 hp | Petrol | 6 | 2010–now |
| 3.0 L 234 hp | Petrol | 6 | 2013–now |
| 3.6 L 290 hp | Petrol | 6 | 2010–now |
| 3.0 L 243 hp | Diesel | 6 | 2014–now |
| 3.0 L 250 hp | Diesel | 6 | 2013–now |
| 6.4 L 476 hp | Petrol | 8 | 2011–now |
| 3.6 L 294 hp | Petrol | 6 | 2013–now |
| 6.4 L 472 hp | Petrol | 8 | 2011–now |
| 3.0 L 238 hp | Petrol | 6 | 2014–now |
| 3.6 L 281 hp | Petrol | 6 | 2010–now |
| 5.7 L 364 hp | Petrol | 8 | 2011–now |
| 5.7 L 360 hp | Petrol | 8 | 2013–now |
| 6.4 L 481 hp | Petrol | 8 | 2014–now |
| 3.6 L 299 hp | Petrol/Ethanol | 6 | 2017–now |
| 3.6 L 296 hp | Petrol/Ethanol | 6 | 2017–now |
| 3.0 L 218 hp | Diesel | 6 | 2011–now |
| 6.4 L 477 hp | Petrol | 8 | 2014–now |
| 6.2 L 717 hp | Petrol | 8 | 2018–now |
| 6.2 L 710 hp | Petrol | 8 | 2017–now |
Engine variants catalogued for this model (TecDoc), filtered to those built around 2020. We hold catalogued part numbers for the base engine only — decode your VIN and we resolve your exact engine, then the exact part. Full dimensions and specifications for this vehicle are on the 2020 Jeep Grand Cherokee overview.
How to replace the brake pads on a 2020 Jeep Grand Cherokee
- 1Loosen the wheel lug nuts, then raise and securely support the vehicle on axle stands and remove the wheel.
- 2Unbolt the brake caliper, slide it off the rotor, and hang it from the suspension with a wire — never let it dangle by the hose.
- 3Remove the worn pads and hardware, then compress the caliper piston back into its bore with a C-clamp or piston tool.
- 4Fit the new pads with any supplied shims and clips, reinstall the caliper, and torque the bolts to the manufacturer spec.
- 5Refit the wheel, lower the vehicle, and pump the brake pedal until firm before driving. Bed the pads in gently.
⚠ Brakes are safety-critical. If you are unsure, have a shop do the job.
These are general steps for the brakes category. Exact fastener locations, torque values, and the correct part number depend on your 2020 Jeep Grand Cherokee’s build — confirm by VIN before you start.
Shop brake pads for your 2020 Jeep Grand Cherokee
Browse brake pads listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact brake pads by VIN
Search 1.2M+ parts filtered to your exact 2020 Jeep Grand Cherokee by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2020 Jeep Grand Cherokee — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What brake pads fit a 2020 Jeep Grand Cherokee?
VinSnap has no verified brake pad part number for the 2020 Jeep Grand Cherokee yet. Match on the axle (front or rear), the brake caliper make and the pad shape and thickness; the 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb, and it pins down the engine and trim.
How often should the brake pads on a 2020 Jeep Grand Cherokee be replaced?
Brake pads are the friction material that presses against the rotor to slow the wheel. They are a wear item — most last 40,000–70,000 km depending on driving style and pad compound. VinSnap has no manufacturer-specific interval on file for the 2020 Jeep Grand Cherokee; the owner’s manual has the official schedule.
Can I replace the brake pads on a 2020 Jeep Grand Cherokee myself?
Moderate DIY (1–2 hours per axle, basic hand tools). Allow about 1–2 hours per axle. Tools: jack + axle stands, lug wrench, c-clamp or piston tool, socket set, torque wrench. Brakes are safety-critical. If you are unsure, have a shop do the job.