What Wiper Blades Fit a 2020 Jeep Grand Cherokee?
What decides wiper blade fit on the 2020 Jeep Grand Cherokee, where to find your VIN, and how to replace them.
VinSnap does not have a verified wiper blade part number for the 2020 Jeep Grand Cherokee yet. Which wiper blades fit depends on the driver- and passenger-side blade lengths (often different) and the wiper-arm connector type, so compare those on the part you are replacing. The 2020 Grand Cherokee was built with 27 engine variants (from 3.0 L to 6.4 L), so the right wiper blade depends on which one yours has. The 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb; it identifies the exact engine and trim.
Last updated: · Source: TecDoc catalogue (engines)
2020 Jeep Grand Cherokee wiper blades: key facts
| Verified part number | None on file yet |
|---|---|
| Engine variants (2020) | 27, from 3.0 L to 6.4 L |
| Fit is decided by | The driver- and passenger-side blade lengths (often different) and the wiper-arm connector type |
| NHTSA recalls: visibility system (wipers, washers and defrost) | None of 3 on record |
| DIY | Very easy DIY (under a minute, no tools) |
Sources: TecDoc catalogue (engines), NHTSA recalls.
Wiper Blades: what it does & when to replace it
Wiper blades clear rain, snow, and debris from the windshield for visibility. The rubber edge degrades from sun and use; most blades need replacing every 6–12 months. Replacement signs include streaking, skipping, chattering, or squeaking across the glass. Blade length is specific per vehicle and the driver and passenger sides are often different lengths. This is the single easiest car-maintenance task — most blades clip on in under a minute with no tools — and a clear safety upgrade that is frequently neglected.
DIY difficulty: Very easy DIY (under a minute, no tools). Always confirm the correct part for your exact build by VIN before buying.
Which engine does your 2020 Jeep Grand Cherokee have?
The 2020 Jeep Grand Cherokee was sold with 27 engine variants, and the correct wiper blades can differ between them. This is the single thing a year/make/model dropdown cannot tell you.
| Engine | Fuel | Cylinders | Years |
|---|---|---|---|
| 3.6 L 286 hp | Petrol | 6 | 2010–now |
| 5.7 L 352 hp | Petrol | 8 | 2010–now |
| 3.0 L 190 hp | Diesel | 6 | 2011–now |
| 3.0 L 241 hp | Diesel | 6 | 2011–now |
| 6.4 L 468 hp | Petrol | 8 | 2011–now |
| 3.6 L 286 hp | Petrol/Ethanol | 6 | 2010–now |
| 3.6 L 294 hp | Petrol/Ethanol | 6 | 2010–now |
| 5.7 L 366 hp | Petrol | 8 | 2011–now |
| 3.6 L 284 hp | Petrol | 6 | 2010–now |
| 3.0 L 234 hp | Petrol | 6 | 2013–now |
| 3.6 L 290 hp | Petrol | 6 | 2010–now |
| 3.0 L 243 hp | Diesel | 6 | 2014–now |
| 3.0 L 250 hp | Diesel | 6 | 2013–now |
| 6.4 L 476 hp | Petrol | 8 | 2011–now |
| 3.6 L 294 hp | Petrol | 6 | 2013–now |
| 6.4 L 472 hp | Petrol | 8 | 2011–now |
| 3.0 L 238 hp | Petrol | 6 | 2014–now |
| 3.6 L 281 hp | Petrol | 6 | 2010–now |
| 5.7 L 364 hp | Petrol | 8 | 2011–now |
| 5.7 L 360 hp | Petrol | 8 | 2013–now |
| 6.4 L 481 hp | Petrol | 8 | 2014–now |
| 3.6 L 299 hp | Petrol/Ethanol | 6 | 2017–now |
| 3.6 L 296 hp | Petrol/Ethanol | 6 | 2017–now |
| 3.0 L 218 hp | Diesel | 6 | 2011–now |
| 6.4 L 477 hp | Petrol | 8 | 2014–now |
| 6.2 L 717 hp | Petrol | 8 | 2018–now |
| 6.2 L 710 hp | Petrol | 8 | 2017–now |
Engine variants catalogued for this model (TecDoc), filtered to those built around 2020. We hold catalogued part numbers for the base engine only — decode your VIN and we resolve your exact engine, then the exact part. Full dimensions and specifications for this vehicle are on the 2020 Jeep Grand Cherokee overview.
How to replace the wiper blades on a 2020 Jeep Grand Cherokee
- 1Lift the wiper arm away from the windshield until it locks upright.
- 2Press the release tab where the blade meets the arm and slide the old blade off the hook.
- 3Slide the new blade on until it clicks, matching the driver and passenger blade lengths (often different).
- 4Lower the arm gently back onto the glass and test the wipers.
⚠ Driver and passenger blades are frequently different lengths — confirm both sizes for your vehicle.
These are general steps for the exterior category. Exact fastener locations, torque values, and the correct part number depend on your 2020 Jeep Grand Cherokee’s build — confirm by VIN before you start.
Shop wiper blades for your 2020 Jeep Grand Cherokee
Browse wiper blades listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact wiper blades by VIN
Search 1.2M+ parts filtered to your exact 2020 Jeep Grand Cherokee by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2020 Jeep Grand Cherokee — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What wiper blades fit a 2020 Jeep Grand Cherokee?
VinSnap has no verified wiper blade part number for the 2020 Jeep Grand Cherokee yet. Match on the driver- and passenger-side blade lengths (often different) and the wiper-arm connector type; the 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb, and it pins down the engine and trim.
How often should the wiper blades on a 2020 Jeep Grand Cherokee be replaced?
Wiper blades clear rain, snow, and debris from the windshield for visibility. The rubber edge degrades from sun and use; most blades need replacing every 6–12 months. VinSnap has no manufacturer-specific interval on file for the 2020 Jeep Grand Cherokee; the owner’s manual has the official schedule.
Can I replace the wiper blades on a 2020 Jeep Grand Cherokee myself?
Very easy DIY (under a minute, no tools). Allow under 2 minutes per blade. Tools: none. Driver and passenger blades are frequently different lengths — confirm both sizes for your vehicle.