What Brake Rotors Fit a 2020 Jeep Grand Cherokee?
What decides brake rotor fit on the 2020 Jeep Grand Cherokee, where to find your VIN, and how to replace them.
VinSnap does not have a verified brake rotor part number for the 2020 Jeep Grand Cherokee yet. Which brake rotors fit depends on the axle, the disc diameter and thickness, and whether the disc is solid or vented, so compare those on the part you are replacing. The 2020 Grand Cherokee was built with 27 engine variants (from 3.0 L to 6.4 L), so the right brake rotor depends on which one yours has. The 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb; it identifies the exact engine and trim.
Last updated: · Source: TecDoc catalogue (engines)
2020 Jeep Grand Cherokee brake rotors: key facts
| Verified part number | None on file yet |
|---|---|
| Engine variants (2020) | 27, from 3.0 L to 6.4 L |
| Fit is decided by | The axle, the disc diameter and thickness, and whether the disc is solid or vented |
| NHTSA recalls: brakes | None of 3 on record |
| DIY | Moderate DIY (replace in pairs, do with pads) |
Sources: TecDoc catalogue (engines), NHTSA recalls.
Brake Rotors: what it does & when to replace it
Brake rotors (discs) are the metal discs the pads clamp onto. They wear thinner over time and can warp from heat. Replacement signs include a pulsation or shudder through the brake pedal or steering wheel under braking, deep scoring or grooves you can feel, a blue tint from overheating, or rotor thickness below the manufacturer minimum stamped on the hub. Rotors are usually replaced in pairs (both sides of an axle) and most shops now replace rather than machine them. Replacing rotors is a moderate DIY job and is commonly done together with new pads.
DIY difficulty: Moderate DIY (replace in pairs, do with pads). Always confirm the correct part for your exact build by VIN before buying.
Which engine does your 2020 Jeep Grand Cherokee have?
The 2020 Jeep Grand Cherokee was sold with 27 engine variants, and the correct brake rotors can differ between them. This is the single thing a year/make/model dropdown cannot tell you.
| Engine | Fuel | Cylinders | Years |
|---|---|---|---|
| 3.6 L 286 hp | Petrol | 6 | 2010–now |
| 5.7 L 352 hp | Petrol | 8 | 2010–now |
| 3.0 L 190 hp | Diesel | 6 | 2011–now |
| 3.0 L 241 hp | Diesel | 6 | 2011–now |
| 6.4 L 468 hp | Petrol | 8 | 2011–now |
| 3.6 L 286 hp | Petrol/Ethanol | 6 | 2010–now |
| 3.6 L 294 hp | Petrol/Ethanol | 6 | 2010–now |
| 5.7 L 366 hp | Petrol | 8 | 2011–now |
| 3.6 L 284 hp | Petrol | 6 | 2010–now |
| 3.0 L 234 hp | Petrol | 6 | 2013–now |
| 3.6 L 290 hp | Petrol | 6 | 2010–now |
| 3.0 L 243 hp | Diesel | 6 | 2014–now |
| 3.0 L 250 hp | Diesel | 6 | 2013–now |
| 6.4 L 476 hp | Petrol | 8 | 2011–now |
| 3.6 L 294 hp | Petrol | 6 | 2013–now |
| 6.4 L 472 hp | Petrol | 8 | 2011–now |
| 3.0 L 238 hp | Petrol | 6 | 2014–now |
| 3.6 L 281 hp | Petrol | 6 | 2010–now |
| 5.7 L 364 hp | Petrol | 8 | 2011–now |
| 5.7 L 360 hp | Petrol | 8 | 2013–now |
| 6.4 L 481 hp | Petrol | 8 | 2014–now |
| 3.6 L 299 hp | Petrol/Ethanol | 6 | 2017–now |
| 3.6 L 296 hp | Petrol/Ethanol | 6 | 2017–now |
| 3.0 L 218 hp | Diesel | 6 | 2011–now |
| 6.4 L 477 hp | Petrol | 8 | 2014–now |
| 6.2 L 717 hp | Petrol | 8 | 2018–now |
| 6.2 L 710 hp | Petrol | 8 | 2017–now |
Engine variants catalogued for this model (TecDoc), filtered to those built around 2020. We hold catalogued part numbers for the base engine only — decode your VIN and we resolve your exact engine, then the exact part. Full dimensions and specifications for this vehicle are on the 2020 Jeep Grand Cherokee overview.
How to replace the brake rotors on a 2020 Jeep Grand Cherokee
- 1Raise and support the vehicle, remove the wheel, then unbolt and remove the caliper and caliper bracket.
- 2Remove the old rotor (a retaining screw or a few taps with a mallet may be needed if it is stuck).
- 3Clean the new rotor with brake cleaner to remove the shipping oil, then fit it onto the hub.
- 4Reinstall the bracket and caliper with fresh pads, torquing all fasteners to spec.
- 5Refit the wheel, lower the vehicle, pump the pedal firm, and bed in the new rotors and pads gently.
⚠ Replace rotors in pairs (both sides of an axle) and always with fresh pads.
These are general steps for the brakes category. Exact fastener locations, torque values, and the correct part number depend on your 2020 Jeep Grand Cherokee’s build — confirm by VIN before you start.
Shop brake rotors for your 2020 Jeep Grand Cherokee
Browse brake rotors listings from major marketplaces. Confirm fitment by VIN first — use VinSnap above to get the exact part number for your build before purchasing.
Find the exact brake rotors by VIN
Search 1.2M+ parts filtered to your exact 2020 Jeep Grand Cherokee by VIN. Stop buying the wrong part.
Find parts by VIN →Decode your exact VIN
Get 100+ specs for your specific 2020 Jeep Grand Cherokee — engine, trim, recalls, and a PDF. Instant decode for $1.99.
Decode my VIN →Frequently asked questions
What brake rotors fit a 2020 Jeep Grand Cherokee?
VinSnap has no verified brake rotor part number for the 2020 Jeep Grand Cherokee yet. Match on the axle, the disc diameter and thickness, and whether the disc is solid or vented; the 17-character VIN is on the driver-side dashboard at the base of the windshield and on the sticker in the driver’s door jamb, and it pins down the engine and trim.
How often should the brake rotors on a 2020 Jeep Grand Cherokee be replaced?
Brake rotors (discs) are the metal discs the pads clamp onto. They wear thinner over time and can warp from heat. VinSnap has no manufacturer-specific interval on file for the 2020 Jeep Grand Cherokee; the owner’s manual has the official schedule.
Can I replace the brake rotors on a 2020 Jeep Grand Cherokee myself?
Moderate DIY (replace in pairs, do with pads). Allow about 2 hours per axle. Tools: jack + axle stands, socket set, torque wrench, brake cleaner. Replace rotors in pairs (both sides of an axle) and always with fresh pads.